Contribute
Register

[solved] Alienware 15 R2 install EI capitan&install Mac Sierra Success

Status
Not open for further replies.
pedrazacarlos said:
IMG_20170529_022441

IMG_20170529_022441

Thanks for reply, I add my EFI on a zip
Click to expand...
in your kexts other folder, remove everything apart from Fakesmc.kext

in your patched folder, remove everything (just leave the patched folder with nothing inside)

<key>NvidiaWeb</key>
<true/>

set that to false in your config.plist

remove nvda_drv=1 and replace with nv_disable=1 in your clover.plist

what hard drive do you have? is it a SSD? if so you may need SATA-100-series-unsupported.kext.zip in your kext other folder

which you can find from the guide linked above

please update your hardware profile as per rules
 
feartech said:
in your kexts other folder, remove everything apart from Fakesmc.kext

in your patched folder, remove everything (just leave the patched folder with nothing inside)

<key>NvidiaWeb</key>
<true/>

set that to false in your config.plist

remove nvda_drv=1 and replace with nv_disable=1 in your clover.plist

what hard drive do you have? is it a SSD? if so you may need SATA-100-series-unsupported.kext.zip in your kext other folder

which you can find from the guide linked above

please update your hardware profile as per rules
Click to expand...
I just update now my priofile , my setup is this:
Alienware 15 R2(late 2015)
i7 6700 HQ
DDR4 16 Gb Ram
GTX 970m
M.2 Liteon CV3 128 GB
Thanks in advance for your help
 
feartech said:
in your kexts other folder, remove everything apart from Fakesmc.kext

in your patched folder, remove everything (just leave the patched folder with nothing inside)

<key>NvidiaWeb</key>
<true/>

set that to false in your config.plist

remove nvda_drv=1 and replace with nv_disable=1 in your clover.plist

what hard drive do you have? is it a SSD? if so you may need SATA-100-series-unsupported.kext.zip in your kext other folder

which you can find from the guide linked above

please update your hardware profile as per rules
Click to expand...
Sorry for the noob question but what is my patched folder and can't see the sata 100 series kext
 
Finally i can boot el capitan but now i cant see my m.2 is a Liteon CV3-8D128-11 Sata 128 GB
im trying to use this patches https://github.com/RehabMan/patch-nvme
but i dont have a linux for compile, any idea ?
Regards
 
RehabMan said:
What exactly are you trying to "compile" in Linux?
Click to expand...
I don't compile anything don't have Linux just i don't understand the command line or what I need to do to get my m.2 detected, sorry for my bad English, regards
 
pedrazacarlos said:
I don't compile anything don't have Linux just i don't understand the command line or what I need to do to get my m.2 detected, sorry for my bad English, regards
Click to expand...

Ubuntu USB can be created in Windows. I think I already provided a link for that...
Once you have the USB, you can boot into Linux without installing it... ("Try" option).
At that point, you can run Terminal, and type 'lspci -nn' followed by enter.
You can use copy/paste to get the text into a reply here. You will find Firefox right on the Ubuntu desktop.
 
RehabMan said:
Ubuntu USB can be created in Windows. I think I already provided a link for that...
Once you have the USB, you can boot into Linux without installing it... ("Try" option).
At that point, you can run Terminal, and type 'lspci -nn' followed by enter.
You can use copy/paste to get the text into a reply here. You will find Firefox right on the Ubuntu desktop.
Click to expand...
Thank You so much for your help, got this from ubuntu terminal:

ubuntu@ubuntu:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1910] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Sky Lake PCIe Controller (x16) [8086:1901] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake Integrated Graphics [8086:191b] (rev 06)
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 07)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] [8086:a103] (rev 31)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1)
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #5 [8086:a114] (rev f1)
00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #6 [8086:a115] (rev f1)
00:1c.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #7 [8086:a116] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a14e] (rev 31)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
01:00.0 3D controller [0302]: NVIDIA Corporation GM204M [GeForce GTX 970M] [10de:13d8] (rev a1)
3b:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller [1969:e0a1] (rev 10)
3c:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
3d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
 
pedrazacarlos said:
Thank You so much for your help, got this from ubuntu terminal:

ubuntu@ubuntu:~$ lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation Sky Lake Host Bridge/DRAM Registers [8086:1910] (rev 07)
00:01.0 PCI bridge [0604]: Intel Corporation Sky Lake PCIe Controller (x16) [8086:1901] (rev 07)
00:02.0 VGA compatible controller [0300]: Intel Corporation Skylake Integrated Graphics [8086:191b] (rev 06)
00:04.0 Signal processing controller [1180]: Intel Corporation Skylake Processor Thermal Subsystem [8086:1903] (rev 07)
00:14.0 USB controller [0c03]: Intel Corporation Sunrise Point-H USB 3.0 xHCI Controller [8086:a12f] (rev 31)
00:14.2 Signal processing controller [1180]: Intel Corporation Sunrise Point-H Thermal subsystem [8086:a131] (rev 31)
00:16.0 Communication controller [0780]: Intel Corporation Sunrise Point-H CSME HECI #1 [8086:a13a] (rev 31)
00:17.0 SATA controller [0106]: Intel Corporation Sunrise Point-H SATA Controller [AHCI mode] [8086:a103] (rev 31)
00:1c.0 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #1 [8086:a110] (rev f1)
00:1c.4 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #5 [8086:a114] (rev f1)
00:1c.5 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #6 [8086:a115] (rev f1)
00:1c.6 PCI bridge [0604]: Intel Corporation Sunrise Point-H PCI Express Root Port #7 [8086:a116] (rev f1)
00:1f.0 ISA bridge [0601]: Intel Corporation Sunrise Point-H LPC Controller [8086:a14e] (rev 31)
00:1f.2 Memory controller [0580]: Intel Corporation Sunrise Point-H PMC [8086:a121] (rev 31)
00:1f.3 Audio device [0403]: Intel Corporation Sunrise Point-H HD Audio [8086:a170] (rev 31)
00:1f.4 SMBus [0c05]: Intel Corporation Sunrise Point-H SMBus [8086:a123] (rev 31)
01:00.0 3D controller [0302]: NVIDIA Corporation GM204M [GeForce GTX 970M] [10de:13d8] (rev a1)
3b:00.0 Ethernet controller [0200]: Qualcomm Atheros Killer E2400 Gigabit Ethernet Controller [1969:e0a1] (rev 10)
3c:00.0 Network controller [0280]: Qualcomm Atheros QCA6174 802.11ac Wireless Network Adapter [168c:003e] (rev 32)
3d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5227 PCI Express Card Reader [10ec:5227] (rev 01)
Click to expand...

Your profile does not reflect your laptop hardware details (which appears to be dual-GPU [may be Optimus], Intel+Nvidia).

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top