[solved] 20702A3 Bluetooth handoff doesn't work(Brm94352)

[bloodstream]

This is my first time using High Sierra. I installed the kexts, dsdt and ssd as I did in Sierra. but the result is different.
Everything works perfectly except handoff bluetooth.
here's what it says.

Bluetooth Low Energy Supported: Yes
Handoff Supported: No
Instant Hot Spot Supported: No
Manufacturer: Broadcom
Transport: USB
Chipset: 20702A3
Firmware Version: v14 c5862
Bluetooth Power: On
Discoverable: Off
Connectable: Yes

I attached 2 outputs from terminal, IOREG, and files from Clover. please help.

 

[bloodstream]

As I wrote above, the bluetooth works but it doesn't work functionally. I have been searching for this issue for three days. I have found the solution. What I did I install

Some patches are the same so use only one. use both 120 and 130.

config-bcm94352-120.plist (use clover configurator)
config-bcm94352-130.plist. (use clover configurator)
and AirportBrcmFixup.kext (Should be in clover/kext/other/)
10.13.x is not like 10.12.x, it needs AirportBrcmFixup.kext which I ve never had this kext in the Kext/Other before.

Here is what happened after you install those patches.

Bluetooth Low Energy Supported: Yes
Handoff Supported: Yes
Instant Hot Spot Supported: Yes
Manufacturer: Broadcom
Transport: USB
Chipset: 20702A3
Firmware Version: v14 c5862

Thank you Tonymacx86

 

[piju]

Hi Bloodstream, did you add all patches from both 120 and 130 (and only keeping one if there's more than one)?

 

[RehabMan]

As I wrote above, the bluetooth works but it doesn't work functionally. I have been searching for this issue for three days. I have found the solution. What I did I install

Some patches are the same so use only one. use both 120 and 130.

config-bcm94352-120.plist (use clover configurator)
config-bcm94352-130.plist. (use clover configurator)
and AirportBrcmFixup.kext (Should be in clover/kext/other/)
10.13.x is not like 10.12.x, it needs AirportBrcmFixup.kext which I ve never had this kext in the Kext/Other before.

Here is what happened after you install those patches.

Bluetooth Low Energy Supported: Yes
Handoff Supported: Yes
Instant Hot Spot Supported: Yes
Manufacturer: Broadcom
Transport: USB
Chipset: 20702A3
Firmware Version: v14 c5862

Thank you Tonymacx86

"Problem Reporting" files are incomplete.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[bloodstream]

Hi Bloodstream, did you add all patches from both 120 and 130 (and only keeping one if there's more than one)?

both of them 120 and 130. I have already attached. if you're still having the problem, send the reporting files to Rehabman, Please read what he needs carefully.

 

[aelsharawi]

hello

would u please elaborate more on how did u do that?

I Have another wifi card on the system. could that kext and batches affect it, since u have many settings on that

 

[RehabMan]

hello

would u please elaborate more on how did u do that?

I Have another wifi card on the system. could that kext and batches affect it, since u have many settings on that

You must describe your problem in detail and attach PR files.

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.

 

[aelsharawi]

As I wrote above, the bluetooth works but it doesn't work functionally. I have been searching for this issue for three days. I have found the solution. What I did I install

Some patches are the same so use only one. use both 120 and 130.

config-bcm94352-120.plist (use clover configurator)
config-bcm94352-130.plist. (use clover configurator)
and AirportBrcmFixup.kext (Should be in clover/kext/other/)
10.13.x is not like 10.12.x, it needs AirportBrcmFixup.kext which I ve never had this kext in the Kext/Other before.

Here is what happened after you install those patches.

Bluetooth Low Energy Supported: Yes
Handoff Supported: Yes
Instant Hot Spot Supported: Yes
Manufacturer: Broadcom
Transport: USB
Chipset: 20702A3
Firmware Version: v14 c5862

Thank you Tonymacx86

could you please share your clover folder instead?

 

[bloodstream]

could you please share your clover folder instead?

Did u do as I said?

 

[aelsharawi]

Yes but I need to confirm that I need to copy all the kext patches from the config-bcm94352-120.plist and onfig-bcm94352-130.plist

or just the bluetooth one?

I would really appreciate your help