- Joined
- Apr 25, 2010
- Messages
- 53
- Motherboard
- Gigabyte Z97x-UD7 TH
- CPU
- i7-4790K
- Graphics
- RX 580
- Mobile Phone
I disconnected my HD and connected a brand new drive to create a "spare" installation. I couldn't get that installation to boot so I put it away for a later time and reconnected main HD, which has been working great for at least the past6 months. Now I cannot get it to boot consistently.
I have to cycle between boot arguments ( -v, nvda_drv=1, nv_disable=1 and combinations of these three) about a dozen times before it will boot.
My errors are usually "error loading kernel cache" or "couldn't allocate runtime area".
I've tried to run MultiBeast again but it fails every time.
I don't know what to try next.
Would really appreciate any guidance.
thanks in advance!
I have to cycle between boot arguments ( -v, nvda_drv=1, nv_disable=1 and combinations of these three) about a dozen times before it will boot.
My errors are usually "error loading kernel cache" or "couldn't allocate runtime area".
I've tried to run MultiBeast again but it fails every time.
I don't know what to try next.
Would really appreciate any guidance.
thanks in advance!
Last edited: