So I got back, I finally sorted out my mess.

[peachlove]

So, after being away for a super long time from this community
I have came back after the long time.
I got my parts all figured out
so here they are:
CPU: Intel i3-4370 <- Best deal I could find at local computer store so I don't need to go online.
Mobo: Gigabyte GA-H81M-HD3 <- Went with this cause the HD2 doesn't have USB 3.0 header and because my case has front USB 3.0 ._.
Memory: 1 stick of 8GB of memory 1.5v, DDR3-1600
Hard Drive for OS X: Samsung 840 SSD MZ-7TD120BW
Hard Drive for whatever reason ._. I have no idea what to use it for: Toshiba MQ01ABD050
Case: NZXT Phantom 240 <- My most favorite case for the futuristic and amazing design
Power Supply: Corsair CX430M
Accesories:
Acer Monitor, Logitech M325 (Nature Jewelry) and K750.
You can also point out in the comments below if you have my mouse which is the Logitech M325 (Nature Jewelry).
And of course I will have an anti-static wrist strap....

So, after showing all these parts to you I wonder how should I configure multibeast which is my usual question. Also if you have the mouse

peachlove a.k.a eichi

P.S. I have a limited time range so I might not be able to answer very quickly

 

[bluechox]

u should be fine just following hte guide straightforward... i had this board in mind when i did my build but decided to go for the one just above this one with the B85 chipset... should be the same type of installation...just choose your audio and lan drivers in multibeast and macppro 6.1

 

[peachlove]

Ok that seems simple It turns out I have $40 extra in my budget I think I should change mobo. It might be better than the last one. Oh btw I got the RAM and CPU and Case Already best day ever... Since my CPU is Haswell Refresh I thought for going with a Z87 or H87 Chipset Now I wonder if I should go for a USB 3.0 Mobo..