Sleep Support on Gigabyte GA-P67A-UD5-B3 Bios F5

[Uray25]

Hey All,

Got Lion running on my Machine except for Sleep, can anyone help me out ?
I used de DSDT file for my Motherboard. Installed Audio and Networking.
Everything fine. Installed various applications, which all seem to work.

Now the fun part, i just can't seem to get Sleep working.

My setup, only important part is the Motherboard i guess, but anyway:
Gigabyte GA-P67A-UD5-B3 Bios revision F5
Intel Core i7 2600K
16Gb Corsair Vengeance
Gainward 570GTX
Kingston HyperX 120Gb SSD
Apple Keyboard
Apple Mouse

I thank you all in advance for any help i get...

 

[ovb1]

Hi I have almost exactly the same set up as you. MB CPU and Memory and sleep works great.

When you say sleep do you mean auto-sleep via energy saver or it wont sleep at all even when you tell it too?

If auto-sleep is the problem then I found updating to 10.7.3 solved the problem.

I'm using the F8 bios with the F7 DSDT with no problems so far.

Cheers

 

[Uray25]

It doesn't work at all...

Maybe i should Update to F8 with the F7 DSDT ?!
( if the DSDT file is correctly installed btw, anyway to check ? )

But i remember some troubles with a later Bios and my CPU Multiplier of 45, don't recall which one that was though.

 

[ovb1]

You will often have sleep issues with a large overclock.
I believe there are some BIOS settings which can be fine tuned to improve sleep with larger overclocks?
Search in the overclocking section?

More likely this than the BIOS F5 worked fine for me.

 

[Uray25]

Ok, thanks for your feedback...

Will try Stock Settings and post my findings.
Have searched the overclocking section, not much there on this specific problem.

 

[Uray25]

Tryed again with stock speeds, still no go...

Maybe you can share your Bios Settings with me so that i can compare them ?

Thanks

 

[ovb1]

Tbh I left everything auto except enabled extreme memory profile
Disabled on board FireWire as this stopped auto sleep from working and I never use it.
Then I just changed the essential 'hack' settings - which you must have done to boot!

 

[ovb1]

viewtopic.php?f=7&t=6616

Have you read this?

 

[Uray25]

Tbh I left everything auto except enabled extreme memory profile
Disabled on board FireWire as this stopped auto sleep from working and I never use it.
Then I just changed the essential 'hack' settings - which you must have done to boot!

Well, FireWire is a start, it's enabled at the moment.
Will disable it and try again.

Again thanx for your Feedback.

Much Appreciated.

 

[Uray25]

http://tonymacx86.com/viewtopic.php?f=7&t=6616

Have you read this?

Yeah, i did... A few hours ago...