Sierra 10.12.3 on ASUS A456UR Kaby Lake

[tuxbrain]

Follow this guide https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093
I've successfully installed Sierra on my laptop. (Credit to Rehabman and tonymacxx86 contributor)
Processor : i5-7200U Kaby Lake
GPU : Intel HD 620 & NVIDIA GeForce930Mx
Audio : Intel HDA with Conexant codec
Network : Realtek RTL8168 and Wifi Atheros 9565 (Since this Wifi Card are not recommended, I switched with other Card)

Config.plist using Config_HD620.plist from https://github.com/RehabMan/OS-X-Clover-Laptop-Config.


But I have this problem that doesn't work :
1. Sound
2. Trackpad
3. Battery Status

I already tried follow this https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990

But still those three cannot working on my laptop. Any suggestions/advices are most welcome.

Thanks

 

[RehabMan]

Follow this guide https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093
I've successfully installed Sierra on my laptop. (Credit to Rehabman and tonymacxx86 contributor)
Processor : i5-7200U Kaby Lake
GPU : Intel HD 620 & NVIDIA GeForce930Mx
Audio : Intel HDA with Conexant codec
Network : Realtek RTL8168 and Wifi Atheros 9565 (Since this Wifi Card are not recommended, I switched with other Card)

Config.plist using Config_HD620.plist from https://github.com/RehabMan/OS-X-Clover-Laptop-Config.


But I have this problem that doesn't work :
1. Sound
2. Trackpad
3. Battery Status

I already tried follow this https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990

But still those three cannot working on my laptop. Any suggestions/advices are most welcome.

Thanks

You did not patch ACPI for audio, battery status. Your trackpad might be I2C.
Read the related information in the FAQ.

 

[ben9923]

Check in Wondows' Device Manager if your trackpad is I2C or PS2.
If your trackpad is I2C, you might want to look at this:
https://www.tonymacx86.com/threads/wip-voodooi2c-i2c-trackpad-limited-support.204227/
Note you might need to use DSDT patches like OS Patch, or one of VoodooI2C's patches (INT3442/INT3443/INT3444/INT3445) to make your trackpad work.
If your trackpad is ELAN1200 you would need to use a different kext from MacForceOne's fork, until it's merged back to the main project.