sebgreen's Build: Core i7-4770 - GA-Z87X-UD3H - 16GB 1866Mhz RAM - Intel 4600 Dual Monitor

[neilhart]

I am searching a good bay converter like you used, can you tell me the reference ?
Thank you

I don't mean to hi-jack the thread... however take a look at the line of adapters from Silverstone.

http://www.silverstonetek.com/product_access.php?tno=6&area=en

I used the FP58 on "The White" Prodigy for a slot loading DVD drive and 4 2.5" hard drives.

Good modding,
neil

 

[sebgreen]

I am searching a good bay converter like you used, can you tell me the reference ?
Thank you

This is the one I used:
http://www.silverstonetek.com/product.php?pid=456&area=en

 

[Barenhvrd]

Thanks both of you, great link !

 

[ajid6888]

hi Can you give me guide for installation and multibeast setting for installation Mavericks 10.9.2

 

[Barenhvrd]

hi Can you give me guide for installation and multibeast setting for installation Mavericks 10.9.2

For the multibeast go post #1 where he explains everything.

For Mavricks 10.9.x I recommend you to follow the easy guide http://www.tonymacx86.com/374-unibeast-install-os-x-mavericks-any-supported-intel-based-pc.html

 

[sebgreen]

hi Can you give me guide for installation and multibeast setting for installation Mavericks 10.9.2

Basically just follow these steps:
http://www.tonymacx86.com/basics/104542-im-new-everything-where-do-i-start.html

I spent quite some time reading thought everything and going through lots of stuff on these forums before I even bought any parts.

Is there any particular part you are stuck on? What hardware do you have?

 

[Barenhvrd]

Just see some of your updates.

ha ha going to 32 GB, nice.

I was looking for a solution to have 2 fans on the front like you did, and thought I could use some acrylic plate, holes drilled for the fans, and then bend the plate so it will be screwed in the 2 front screws from the PSU at the bottom of the case.

Like this:

(source: http://forum.hardware.fr/hfr/Overcl...dding/worklog-besoin-votes-sujet_280751_1.htm )

I received the laser Hive conversion kit today, gonna open a thread soon =D

 

[sebgreen]

Just see some of your updates.

ha ha going to 32 GB, nice.

I was looking for a solution to have 2 fans on the front like you did, and thought I could use some acrylic plate, holes drilled for the fans, and then bend the plate so it will be screwed in the 2 front screws from the PSU at the bottom of the case.

Like this:

(source: http://forum.hardware.fr/hfr/Overcl...dding/worklog-besoin-votes-sujet_280751_1.htm )

I received the laser Hive conversion kit today, gonna open a thread soon =D

Nice mod there. I didn't think of doing that. Does the acrylic panel have the cutout for the front IO board? This it is blocked by the fan in the pic.

I will remember this method when I am planning my next G5 build.

 

[Stork]

The User Builds threads are for sharing build components for successfully running OS X. The forum has sections for Case Mods, and discussion on case mods are to be posted in the appropriate Case Mods forum sections. http://www.tonymacx86.com/case-mods/. Consequently, the discussion is this thread is to focus on using and installing OS X on sebgreen's Z87X-UD3H system.

 

[sebgreen]

The User Builds threads are for sharing build components for successfully running OS X. The forum has sections for Case Mods, and discussion on case mods are to be posted in the appropriate Case Mods forum sections. http://www.tonymacx86.com/case-mods/. Consequently, the discussion is this thread is to focus on using and installing OS X on sebgreen's Z87X-UD3H system.

Sorry.

Feel like I have just been told of my the headmaster.