Screwed up during the install

[sundance2012]

Was that a misprint? I don't know what Kexts are?

Have you set your BIOS to the recommended settings for OS X?

Yep, all it really says to do is boot from the USB thumb drive as you know and that is how I have it. ....and checked to make sure it's still the same before I boot. I wouldn't think it would do anything to the thumb drive either, but something is going hay wire.

Thanks for the help, got to give this a rest till tomorrow, maybe it will fix it's self????

 

[RTK]

Use the BIOS settings from the iBoot + Multibeast page:
http://tonymacx86.blogspot.com/2010/04/ ... -x-on.html

FYI - The above page is linked in the UniBeast instructions.

STEP 3: Install Mac OS X Lion
You're almost done! All you need to do is boot from the USB drive and install! Your hard drive should be set in BIOS to AHCI mode. For recommended BIOS settings and screenshots, check out iBoot + MultiBeast.

 

[sundance2012]

Still having trouble with this. I have run Easybeast (a few times) but it's not making a bootable HDD. What options do i select in Easybeast? Attached is a image of what I get when I try to boot from the HDD after running EB.