- Joined
- Mar 31, 2010
- Messages
- 15
- Motherboard
- Gigabyte GA-P55A-UD5
- CPU
- i7-860
- Graphics
- HD 5770
Screen works only after plug out/in - Mountain Lion
Hi,
i am silently reading this forum since a long time and set up a few Hacks over the years..
Usually i find everyting through the search function - but not now..
I was running a hack on Lion and Snow Leopard without Problems.
SPECS:
8GB-Kit G-Skill RipJaws PC3-12800U CL7
Gigabyte GA-P55A-UD5, Intel P55, ATX, DDR3, PCI-Express - F12 Bios
Intel Core i7-860 Tray 8192Kb, LGA1156
Radeon 5770 1024mb
64GB OCZ SSD
2x EIZO 27" - 1x DVi 1x DP
1x SONY TV - HDMI
Yeasterday i updated it to Mountain Lion.
My steps:
1. Used my (working) ML-Unibeast stick to get into Installscreen
2. The Displays got black every time so i disconnected 2 of my 3 screens.
3. Black on Installscreen again so i plugged the Display out and in (DVI) and i had a picture.
4. Now i could install OSX 10.8.
5. But ow i have to plug out/in all the displays everytime OSX boots, what really sucks
BTW i did a USER-DSDT installation (GA-P55A-UD5 F12) with MACPRO 3.1 as in SL and LION.
And i did not change any of the BIOS Settings i used in LION.
What could be the problem? Better, how do i get it to work without plugging it out/in all the time?
Thanks!
Hi,
i am silently reading this forum since a long time and set up a few Hacks over the years..
Usually i find everyting through the search function - but not now..
I was running a hack on Lion and Snow Leopard without Problems.
SPECS:
8GB-Kit G-Skill RipJaws PC3-12800U CL7
Gigabyte GA-P55A-UD5, Intel P55, ATX, DDR3, PCI-Express - F12 Bios
Intel Core i7-860 Tray 8192Kb, LGA1156
Radeon 5770 1024mb
64GB OCZ SSD
2x EIZO 27" - 1x DVi 1x DP
1x SONY TV - HDMI
Yeasterday i updated it to Mountain Lion.
My steps:
1. Used my (working) ML-Unibeast stick to get into Installscreen
2. The Displays got black every time so i disconnected 2 of my 3 screens.
3. Black on Installscreen again so i plugged the Display out and in (DVI) and i had a picture.
4. Now i could install OSX 10.8.
5. But ow i have to plug out/in all the displays everytime OSX boots, what really sucks
BTW i did a USER-DSDT installation (GA-P55A-UD5 F12) with MACPRO 3.1 as in SL and LION.
And i did not change any of the BIOS Settings i used in LION.
What could be the problem? Better, how do i get it to work without plugging it out/in all the time?
Thanks!