- Joined
- Feb 11, 2015
- Messages
- 80
- Motherboard
- Xiaomi Mi Notebook Pro
- CPU
- Intel Core i7-8550U
- Graphics
- NVIDIA GeForce MX150
- Mac
- Mobile Phone
Hello
First my set-up :
1. Gigabyte GA-H87M-HD3
2. Intel i5 4590 Haswell
3. 16GB DDR3 1600MHZ (2X8)
4. On Board Graphics Intel HD
5. On Board Audio
6. 2 X 128GB SSD
7. 1000Gb WD HDD + 500Gb WD HDD
After i installed Yosemite i have 2 major problems :
I was able to install Yosemite on my SSD as described in the manual : UniBeast: Install OS X Yosemite on Any Supported Intel-based PC.
1. Still when i boot into Yosemite in the boot apple logo after 3 sec i get the "Snow" screen like in the photo and only when i press on my Input button on my monitor and run true all the inputs until i'm back to the HDMI and than i see my login screen
2. The next problem is the problem i see after i log in into the OS . i get the message saying "The disk you inserted was not readable by this computer" aldo the system keeps running after i press the ignore button
also i forget to mention that in the end of the OS installation in the last "setting your mac" it stops and after a reset I got into the log in screen.
i have a network connection and still haven't test my audio but everything is functional.
3. I still didn't understood how to make a Fusion drive after the installation . i have another 1 Tera HDD installed on the system along side the 128 Gb SSD. i hope that someone can help also with this.
many many thanks for all your help
also here is a screen shout of my system graphics :
First my set-up :
1. Gigabyte GA-H87M-HD3
2. Intel i5 4590 Haswell
3. 16GB DDR3 1600MHZ (2X8)
4. On Board Graphics Intel HD
5. On Board Audio
6. 2 X 128GB SSD
7. 1000Gb WD HDD + 500Gb WD HDD
After i installed Yosemite i have 2 major problems :
I was able to install Yosemite on my SSD as described in the manual : UniBeast: Install OS X Yosemite on Any Supported Intel-based PC.
1. Still when i boot into Yosemite in the boot apple logo after 3 sec i get the "Snow" screen like in the photo and only when i press on my Input button on my monitor and run true all the inputs until i'm back to the HDMI and than i see my login screen
2. The next problem is the problem i see after i log in into the OS . i get the message saying "The disk you inserted was not readable by this computer" aldo the system keeps running after i press the ignore button
also i forget to mention that in the end of the OS installation in the last "setting your mac" it stops and after a reset I got into the log in screen.
i have a network connection and still haven't test my audio but everything is functional.
3. I still didn't understood how to make a Fusion drive after the installation . i have another 1 Tera HDD installed on the system along side the 128 Gb SSD. i hope that someone can help also with this.
many many thanks for all your help
also here is a screen shout of my system graphics :
Last edited by a moderator: