RTC: Only single RAM bank (128 bytes)

[sol56]

Finally, I`ve tried to run with DSDT=/DSDT.fake -v -x -f, and couldn't boot .

What`s happening? What am I doing wrong? is there any solution?

Thank you again!

The situation is definately not any worse now. Only boot with "-v -f npci=0x2000" and u should be able to boot.

 

[raubiero]

I've done so, and have the same results.

I've tried also to boot with -v-f npci=0x3000, and the same....any ideas?

Other thing, what does the error - Kext com.x86dev.driver.lspcidrv. ...
Mean?

Thanks

 

[raubiero]

i remember that use migration tool in multibeast.Then all kext are in system/library/extensions.is there my DSDT?
i´ve read in forums that there's conflicts with npci=0x2000 in DSDT and com.apple.boot plis, its true?
i've read also that PCI configuration begin may not be due to an error in the configuration of the graphics card, if not a hardware change not reflected in the DSDT (in my case increased RAM). its posible?. In this case, could be edited DSDT on Windows?
could be the problem definitions selecting mac 5.1?

¿?¿?¿?¿?¿?¿?¿?¿?¿?¿?

 

[raubiero]

Yeaaaahhh!!!! I'm very Happy!!!
i've got to enter in lion OsX.
it's been complicated after trying a lot of things....
My Steps are:
First: Install macdrive into W7 system and look that it was in the Lion partition...
my DSDT in /extra/DSDT.aml
Second: Del npci=0x2000 into org.chameleon.boot.plist. (I'm not sure if it influences, in com.apple.boot.plist not appear)
Third: Copy AHCI_3dParty_SATA.kext from my backup_kext folder to /extra (for what might happen).
...this steps into the W7 OS.

after...
In My first reboot chimera i've obtained the same resultates [PCI configuration begin]
Then I've Rebooted using rboot CD. with DSDT=No -v -f .... and voala!!!!!
I'm here, hello world!!!
the graphics found correctly, duel monitor.
Lion found correctly, except little thinks, sound, external usb ports, etc.


Now the question is what to do?, are you recommended update to 10.7.2 to do something more?


thanks for all.
I'm not sure if i'll try to do anything until someone helps me. any suggestion?

 

[raubiero]

Hi guys!!
The problem has been partially solved.
First i've boot with rboot and DSDT=No -v -f in the flag
Then i've updated to 10.7.2
before having reboot, i've run multi beast with these options:
- User DSDT Install
- Drivers&bootloaders/Kexts&Enablers/audio/realtek Alc8xx/AppleHDA Rollback
- Drivers&bootloaders/Kexts&Enablers/Disk/3dPArty SATA
- Miscellanius/FakeSMC
- USB 3.0

After having del ncpi=0x2000 darkwake= 0 from org.chameleon.boot.plist, i've repaired permissions with kext wizard

Reboot
thats all.
I could run for 3 times with -v without any problems, but in console still appears :

24/11/11 14:52:02,000 kernel: RTC: Only single RAM bank (128 bytes)
24/11/11 14:52:02,000 kernel: [ PCI configuration begin ]
24/11/11 14:52:02,000 kernel: FakeSMC: opensource SMC device emulator by netkas (C) 2009
24/11/11 14:52:02,000 kernel: FakeSMC: plugins & plugins support modifications by mozodojo, usr-sse2, slice (C) 2010
24/11/11 14:52:02,000 kernel: FakeSMCDevice: 17 preconfigured keys added:
24/11/11 14:52:02,000 kernel: FakeSMCDevice: successfully initialized

...after few time continue the process
24/11/11 14:52:02,000 kernel: PCI configuration changed (bridge=3 device=2 cardbus=0)
24/11/11 14:52:02,000 kernel: [ PCI configuration end, bridges 7 devices 27 ]
....

and loading lion osx.
I'll investigated Thank you very much!!!

 

[leeyee]

I'm having the exact same problem, and thx for ur tutorial !

 

[Baasjebram]

I'm having the same error: "RTC: Only single RAM bank (128 bytes)" Did you reboot with clover?

 

[hyphenbash]

@Baasjebram have figured it out with clover boot?

 

[Baasjebram]

@Baasjebram have figured it out with clover boot?

Sorry, It's a long time ago so I can't remember the right fix for it. Have you tried bootflag "slide=0" ?

 

[hyphenbash]

Sorry, It's a long time ago so I can't remember the right fix for it. Have you tried bootflag "slide=0" ?

Yes, I tried, still the same log `RTC: Only single RAM bank (128 bytes)` and `VirtualSMC: efend @ no extra rtc memory is present for key erase`. But I thought on newer clover version this flag is not needed any more.