- Joined
- Mar 4, 2014
- Messages
- 440
- Motherboard
- Gigabyte Z390 M Gaming
- CPU
- i5 9400F
- Graphics
- RX 580
- Mac
- Mobile Phone
HPxx ports are used for the hubs attached to EH01.PR11 and EH02.PR21 (in which case UsbConnector should be set to Internal for PR11/PR21). If you don't have any HPxx ports then I think it's okay to remove them.Hi
@headkaze please can you help?
I'm trying to get USB set up using Hackintool. Followed the instructions on your app to map the ports. I am using the EHCI rename and the port limit patches plus Fake PCIID. I have mapped all my ports that are now on XHC but I see two ports on EH01 and EH02 which are PR11 and PR21 respectively.
Is it correct that those internal ports are there on EHC01/02, also when I am counting to get to 15 ports, should I include those (PR11/PR21) or not? All other ports are on XHC. Apologies for my ignorance
@AdamHill looking at your IORegistry file I can see you have WhateverGreen and AppleALC installed and your display is connected to AppleIntelFramebuffer@2 (connector 2 / index 3) and all the connector-type's are set to HDMI. So as far as I can tell you're doing everything right.
You have your audio Layout ID set to 2. Have you tried injecting other values?
I'm not sure to be honest. Probably better asking these questions in a separate thread as this one is for Hackintool related issues.I have tried a couple but I thought that was only changing the ALC892 port. When I did change it prior I didn't have aduio options interal speakers, digital, etc. Is it possible on another port that HDMI audio and the rear and fronts will all work?
Can you try the latest commit.i found the project and the DisplaymergeNub, i try to add at link, by not successfull.