Recommended Bios setting for a Asus Prime Z370-a with i5-8400

[EnderManGamezz]

I having issues with my bios settings and the initial install for mac os High Siera. Could anyone help with the recommended bios settings

CPU- i5-8500
MB - Asus Prime Z370-a
GPU-GeForce GTX 1070
Memory - Crucial 16gb

 

[freddarr]

Hi Ender
This are my Bios settings for Z370 Prime A with Crucial 16gb and EVGA GTX 1070
Update to Bios 1002
After reboot go to the bios again and press F7 go to Exit and Load Optimized Defaults
In the main window XMP Profile# 1
F7 Again
Advance
CPU Configuration
Hyper-Threading Enabled
Intel Virtualization Technology Enabled
System Agent Configuration VT-d Disable
Above 4G Decoding Enabled
Graphics Configuration Primary Display PCIE
GPU Multi-Monitor Enable
PCH Configuraton IOAPIC 24-119 Entries Enable
Onboard Devices Configuration Serial Port Configuration Serial Port Off
USB Configuration USB Mouse and Keyboard Simulator - Disabled
Boot
Fast Boot Diasble
CSM Compatibility Support Module Launch CSM Enable
Boot Device Control UEFI and Legacy OPROM
Boot from Storage Devices UEFI
Secure boot state disabled Go to Key Management and change PK Management values to 0
OS Type=Other OS

Good Luck!!

 

[NorthAmTransAm]

Hi Ender
This are my Bios settings for Z370 Prime A with Crucial 16gb and EVGA GTX 1070
Update to Bios 1002
After reboot go to the bios again and press F7 go to Exit and Load Optimized Defaults
In the main window XMP Profile# 1
F7 Again
Advance
CPU Configuration
Hyper-Threading Enabled
Intel Virtualization Technology Enabled
System Agent Configuration VT-d Disable
Above 4G Decoding Enabled
Graphics Configuration Primary Display PCIE
GPU Multi-Monitor Enable
PCH Configuraton IOAPIC 24-119 Entries Enable
Onboard Devices Configuration Serial Port Configuration Serial Port Off
USB Configuration USB Mouse and Keyboard Simulator - Disabled
Boot
Fast Boot Diasble
CSM Compatibility Support Module Launch CSM Enable
Boot Device Control UEFI and Legacy OPROM
Boot from Storage Devices UEFI
Secure boot state disabled Go to Key Management and change PK Management values to 0
OS Type=Other OS

Good Luck!!

This fixed so much for me. I couldn't boot with Enable USB on my TB card nor IGPU. Now I can. Thank you so much. I should probably go back and figure which one did the trick. Also I didn't change Key Management but maybe I go back one day and do so.

 

[TheHackMac]

Go to Key Management and change PK Management values to 0

How did you do this? Once I click Set new Key, it asks me if I wish to load the default key. On saying no, it aborts saying "No Valid file system available". Please help.

 

[freddarr]

HackMac sorry for the delay. Just click on the value and write 0 on both PK management.

 

[ikerox]

I used your settings an now I have not mouse nor keyboard in BIOS menu and I can't do nothing.. How can I revert those changes?

 

[ikerox]

I used your settings an now I have not mouse nor keyboard in BIOS menu and I can't do nothing.. How can I revert those changes?

Just los default by manual mode.... Thanks

 

[Deleted member 1891562]

i have a z370-a II mobo and while trying to use these settings, I can no longer see my monitor and thus have no control over boot, please any help?