- Joined
- Jan 18, 2012
- Messages
- 127
- Motherboard
- Asus WS x299 Sage/10G
- CPU
- i9-9980XE
- Graphics
- Radeon VII
- Mac
- Mobile Phone
Hi all!
Finally i decided to build a new hackintosh for the next years. And i followed the advice of @djlild7hina with some of the parts (Many thanks!)
Case: Phanteks Enthoo Primo (Is very hard to find a Case for the EKWB x360 Cooler Kit)
Motherboard: Asus WS x299 Sage 10g
CPU: Intel i9-9980XE
GPU: Gigabyte Radeon VII
RAM: 8x16GB DDR4 Crucial Ballistix
PSU: Corsair AX1200i
Liquid Cooler: EKWB EK-Kit X360 + EKWB EK-Vector Radeon VII Copper + Acetal + Backplate
SSD: 2 x Samsung 970 Pro 512Gb NVME M.2
HDD: 2 x HGST Ultrastar 10TB
Monitor: 2 x Benq PD2700U
WLAN/Bluetooth: Broadco BCM94331CD
The plan is to do a RAID 0 with the 2 SSDs and another RAID 0 with other two HDDs. and i have a few questions with this build:
1.- Should i do the raids by hardware on the Motherboard bios? or is better to create a Fusion Drive from Mac for each Raid?
2.- I've heard i have to flash the 10gbit ethernet of the mobo from linux. Can it be done from a knoppix (Live Distro)? or do i have to install linux locally?
3.- Is there any recommended installation for the GPU and WLAN PCI Card? I don't need thunderbolt at the moment, so i don't plan to buy a Gigabyte GC-Titan Ridge card.
4.- I've seen the github folder of @kpg and i would like to know if i can use those SSDTs related to my mobo or i should change something before add them to my setup.
Sorry if i ask already answered questions but the kpg post is huge and i'm newbie with this kinds of setups.
Thanks in advance!
Finally i decided to build a new hackintosh for the next years. And i followed the advice of @djlild7hina with some of the parts (Many thanks!)
Case: Phanteks Enthoo Primo (Is very hard to find a Case for the EKWB x360 Cooler Kit)
Motherboard: Asus WS x299 Sage 10g
CPU: Intel i9-9980XE
GPU: Gigabyte Radeon VII
RAM: 8x16GB DDR4 Crucial Ballistix
PSU: Corsair AX1200i
Liquid Cooler: EKWB EK-Kit X360 + EKWB EK-Vector Radeon VII Copper + Acetal + Backplate
SSD: 2 x Samsung 970 Pro 512Gb NVME M.2
HDD: 2 x HGST Ultrastar 10TB
Monitor: 2 x Benq PD2700U
WLAN/Bluetooth: Broadco BCM94331CD
The plan is to do a RAID 0 with the 2 SSDs and another RAID 0 with other two HDDs. and i have a few questions with this build:
1.- Should i do the raids by hardware on the Motherboard bios? or is better to create a Fusion Drive from Mac for each Raid?
2.- I've heard i have to flash the 10gbit ethernet of the mobo from linux. Can it be done from a knoppix (Live Distro)? or do i have to install linux locally?
3.- Is there any recommended installation for the GPU and WLAN PCI Card? I don't need thunderbolt at the moment, so i don't plan to buy a Gigabyte GC-Titan Ridge card.
4.- I've seen the github folder of @kpg and i would like to know if i can use those SSDTs related to my mobo or i should change something before add them to my setup.
Sorry if i ask already answered questions but the kpg post is huge and i'm newbie with this kinds of setups.
Thanks in advance!