Radeon Compatibility Guide - ATI/AMD Graphics Cards

[zlei]

The RX 580 works perfectly straight away. Maybe the WX 7100 not working isn't due to my configuration error.

Goodbye Nvidia Maxwell and Pascal, I will miss you old friends.

i now update to 10.13.4 beta2 and rx580 runs well without whatevergreen..i only use dsdt patch to rename pegp to gfx0.

 

[hulambre]

i now update to 10.13.4 beta2 and rx580 runs well without whatevergreen..i only use dsdt patch to rename pegp to gfx0.

I can confirm that the Sapphire RX 560 2GB works out of the box in 10.13.4 beta 2. No whatevergreen, no lilu, no RadeonDeInit in the config.plist.



This is the only thing necessary with HD 4600 IGPU in Clover Configurator. Cinebench R15 gives me 85fps.

 

[zlei]

i use the second the dsdt patch...why.the first should be used?

 

[hulambre]

i use the second the dsdt patch...why.the first should be used?

I think it's for the IGPU (integrated graphics) of my Intel i5 4460. If you have that disabled, you don't have to use it.

 

[zlei]

I think it's for the IGPU (integrated graphics) of my Intel i5 4460. If you have that disabled, you don't have to use it.

ok,i get it . thank you

 

[narbatucker]

i now update to 10.13.4 beta2 and rx580 runs well without whatevergreen..i only use dsdt patch to rename pegp to gfx0.

Are you using the Nitro+ RX 580?

 

[zlei]

Are you using the Nitro+ RX 580?

i use rx580 reference card

 

[phrozenpenguin]

This is all looking very promising

I currently use the HD4000 integrated graphics but have an RX 560 on order. I am happy to wait until 10.13.4 is released properly if it makes my life much easier.

Is the process of moving from HD4000 to RX560 detailed anywhere? Things like `rename pegp to gfx0` are all new to me.

 

[hulambre]

This is all looking very promising

I currently use the HD4000 integrated graphics but have an RX 560 on order. I am happy to wait until 10.13.4 is released properly if it makes my life much easier.

Is the process of moving from HD4000 to RX560 detailed anywhere? Things like `rename pegp to gfx0` are all new to me.

1) See my post here: https://www.tonymacx86.com/threads/...d-graphics-cards.171291/page-195#post-1672390

Focus on steps 4, 5 and 6.

2) Make sure you have IGPU is enabled. If it is disabled, I get freezes. With 10.13.4 the only thing you need is this:

https://www.tonymacx86.com/threads/...d-graphics-cards.171291/page-210#post-1694866

This should be done via Clover Configurator in the ACPI section. You have to mount the EFI partition on your boot drive. Next, open the config.plist file.

3) See this too:

https://www.tonymacx86.com/threads/...d-graphics-cards.171291/page-196#post-1672514

 

[krix-t]

W5000

Hello ....
And so i'ved changed; i've selled my fire pro W5000 and i should buy an amd card for my hackintosh; therefore i ask an advice: i think about R9 280x because into list work OOB and no problem are segnaled.
Wich card brend is good for layout ? Gigabyte or Sappahire or?
Thank for to anyone help me.
And sorry for my poor english.
My actual config is:
Mobo: H97M Pro4
i5 4460
Hd4600 and/or Zotac Gt440

HD 7970 / R9 280X Yes 10.8.3 0x6798 2x mDP, HDMI, DVI Hamachi none