Problem intall ML on Gigabyte P55-USB3 Bios F9

[dirkrie]

Hello to all here in this forum.

I have tried nearly everything to get the installation done.
After installation I do the first boot to fix everything with Multibeast.
The boot stops saying to start again by holding the start button again.

When I boot with -x everything goes well. Then I try to install all drivers with Multibeast using the .aml file on the desktop.

I have tried nearly 10 time doing the installation with unibeast, always with a new installation of a clean Mountain Lion.


My hardware:

Board: Gigabyte P55-USB3 Rev.2 Bios F9,
Ram: 2x4 GB DDR3 1333 transcend
80 GB HDD
Graphic: nvidia Geforce GT610 2 GB Ram or Geforce 7500Le 128 MB Ram
CPU Intel i3 540 1st Gen. LGA 1156

Nothing else.

Might the graphic card be the problem?
I tried both graphic cards. With the GT 610 even the -x boot did not work.
This card is a new card. Do I have to give it back to the reseller?
If you recommend an other Card please let me know the type of card.

I need your help please.

Best regards

dirkrie

 

[Matthorne]

Use boot flag -v (verbose mode) and you'll see what halting the system.

If you cant make sense of it, take a picture of whats displayed and upload it on here.

Matt

 

[dirkrie]

Hello Matt, thank you for your fast response.

I booted in -v. Here are the results.

Attach 1 shows the boot with the old graphic card from my older system with SN.
Attachmet 2 shows the boot with the GT610 graphic card which I bought new. When bootscreen stoppen, hdd led stays on for ca. 15 sec.

dirkrie

 

[Matthorne]

The one with [PCI configuration begin] error might be able to be solved with boot flags


try booting with npci=0x2000 and also -v , try this first if you haven't already

then post results.

DW I like helping people out if I can.

 

[dirkrie]

Hello Matt,
there is no difference. Hangx on boot.
Page is now showing pci configuration ends, but the end of this screen is the same.

Dirk

 

[dirkrie]

I stopped working for it until next weekend.

I was able to return the nvidia GT610 and got it changed inti sapphire ultimate HD6670 1Gb.
This card should work out of the box.

I will inform you about problems.
Lets keep in touch!!

Dirk

 

[Matthorne]

Ok mate,

Yeah I'm not the best at explaining things on here but happying trying to help.

Yeah keep in touch..

matt