[Problem] "Attempting System Reboot..." when trying to boot installer 10.13.2 with clover

[edmund2018]

Hello guys, thank you for concerning the problem,

I am doing a fresh installation of Hackintosh to my Optiplex 7050 but unable to boot to the macOS installer in which I was downloaded from Official App Store.

After a days or two of trial and error, I was able to finally get some terminal output from clover, end with "Attempting System Reboot..." and my system reboot immediately (See attached Photo). I do some research on the web saying people with the same problem enable to solve the problem by setting System Definition to iMac 18.2 but not in my case.
( https://www.tonymacx86.com/threads/attempting-system-restart-high-sierra.240313/ )

One thing though I have seen people with Optiplex 7040 enables to install hackintosh without problem, so I guess mines works too!

I am attaching my EFI file here, hope you guys may have come up with some suggestions of how to tackle the problem

Edmund

System Specification:
Core: Intel i7-7700T
Graphic: Intel HD 630
Motherboard: Q270

EDIT: https://drive.google.com/file/d/1i3wBYCeSuFiWONUm1tOBIR5NpBKTjKWg
Watch this video on google drive for more detailed verbose input.

 

[edmund2018]

Update: Successfully boot into the UI of the installer

 

[edmund2018]

Normally this type of reboot is trigger by a Kernel Panic and you have to follow the reason behind it.
Say for my problem, the output says "panic (cpu 0 caller..." follow by Backtrace:
com.apple.driver.AppleIntelKBL.GraphicsFramebuffer(10.3)....

Then you know it is the Internal Graphic Card causing the problem.
Solution is to inject ig-platform-id and intel.

One thing note though, the Intel HD630 is actually natively supported on High Sierra 10.13.2 so it should not need the injection
(Source: https://www.tonymacx86.com/threads/hd630-fix-for-high-sierra-beta.225866/page-3)
I am still investigating this phenomena.

Edmund

 

[borediniraq]

Did you get this to work? I have one too I'd like to experiment with

 

[BreBo]

@borediniraq, please update your profile (personal details) with your Motherboard, CPU and iGPU or Graphics Card.
If you have a prebuilt computer enter make and model instead of motherboard (Mobo).

Profiles need to contain at least your primary system to assist others with helping you.

 

[borediniraq]

@borediniraq, please update your profile (personal details) with your Motherboard, CPU and iGPU or Graphics Card.
If you have a prebuilt computer enter make and model instead of motherboard (Mobo).

That better?

 

[BreBo]

That better?

Please add details of your motherboard (Mobo) to your profile (personal details).
If you have a prebuilt computer enter make and model instead.

 

[borediniraq]

Please add details of your motherboard (Mobo) to your profile (personal details).
If you have a prebuilt computer enter make and model instead.

Put that in "other hardware"...moved it to the MOBO part