PCI configuration end on Z390-P Clover, i5-9600K/Z390

[mr.Tall]

Hi!
Getting error in Clover boot
To make USB used UniBeast v.9.2.0-6, MacOS Mojave

BIOS Ver. 2417
Bios config from this post: [Success] ASUS PRIME Z390-P | i5-8600K | UHD 630 | Mojave 10.14.2
The monitor is connected to the integrated video. I do not know what is the current resolution.

Error: PCI configuration end, bridges 6, devices 13


Tried to use this patch: FIX for boot hangs after BIOS update (ACPI PATCH)
But getting the same result. Also npci=0x2000 not helping
Tried also with external video card (RX 580) with same result
Attached: Verbose photo, Bios config, EFI zip
Please let me know if need more details. And any suggestion what is wrong and how I can fix this?

 

[Big-W]

Did you just follow the BIOS config? The config.plist on the successful build you linked bares no resemblance to yours, may I suggest you use it with a different SMBIOS more suited to your build.

 

[mr.Tall]

Did you just follow the BIOS config? The config.plist on the successful build you linked bares no resemblance to yours, may I suggest you use it with a different SMBIOS more suited to your build.

I trying all the time different variations. For now, I follow standard recommendations
I change it to iMac18,1 but getting the same result
Do you know maybe a success case with this MoBo and with 9600K?

 

[mr.Tall]

Here is my last best try, with better SMBIOS, but fortune look away these days
Same error

 

[Big-W]

What make and model hdd/ssd are you using to install too? The reason I ask is that the Samsung NVME 970 won't work unless you have updated the firmware.

 

[Big-W]

Attached my clover folder for you to try. You will have to edit the SMBIOS in CC. Good luck!

 

[mr.Tall]

Thank you, actually a bit later from another forum I got this clover folder
Still, don't know the difference, but installation sims to go now

I will leave feedback

@Big-W Thank you, really appreciate this