- Joined
- Mar 7, 2011
- Messages
- 4
- Mac
- Classic Mac
- Mobile Phone
I have a Panasonic CF30 MK2 Toughbook. Lets get a guide going... The good thing with all toughbooks of the same model, they have no upgrade options for video/audio and use standard Intel junk
Im a Hackintosh N00b But have done one Dell with great success due to a fellow
poster here on Tonymac.
Im using iBoot to boot to the 10.6 DVD and installing now!
After installing 10.6
WTF!!
Video:yes
Audio:yes
BT:Yes
TOUCHSCREEN:YES (WTF???)
KeyBoard:Yes
Touchpad:No
56K:NO
SATA ICH8-M:YES
WiFi: No Because of Intel 4965 Card (will swap later)
LAN:no
Updating to 10.6.6 + Easy beast now (will edit when done) (i Smell a donation to this site from me commin..)
Multibeast options: Easybeast, FakeSMC + Plugins, Customization-System definetions-MacBook Pro, all OSx86 software. TESTING NOW
On reboot, I lost Keyboard, Screen was split in 1/2 (looked mirrored) fixed in system prefs Display and set to 1024x768 and set it to 100Hz
ran multibeast again: Drivers-misc-voodoo ps/2 controller ->reboot Brought back keyboard & lost audio Still no touchpad.
Ran multibeast again. VoodooHDA 0.2.72 ->reboot brought my audio back
Ran Kext Utility in Applications folder. Reboot- Touchpad works.
Installed kext for marvell ethernet rebooted- works
http://www.multiupload.com/9HEZCUI4DQ Link to ethernet kext
Installed VooDoo Battery-reboot-> now battery / charger indicator works (EVEN BOTH BATTERIES!!!)
Anyone care to add?
EDIT---
I will be updating this guide soon, as I have found some bugs to iron out.
Im a Hackintosh N00b But have done one Dell with great success due to a fellow
poster here on Tonymac.
Im using iBoot to boot to the 10.6 DVD and installing now!
After installing 10.6
WTF!!
Video:yes
Audio:yes
BT:Yes
TOUCHSCREEN:YES (WTF???)
KeyBoard:Yes
Touchpad:No
56K:NO
SATA ICH8-M:YES
WiFi: No Because of Intel 4965 Card (will swap later)
LAN:no
Updating to 10.6.6 + Easy beast now (will edit when done) (i Smell a donation to this site from me commin..)
Multibeast options: Easybeast, FakeSMC + Plugins, Customization-System definetions-MacBook Pro, all OSx86 software. TESTING NOW
On reboot, I lost Keyboard, Screen was split in 1/2 (looked mirrored) fixed in system prefs Display and set to 1024x768 and set it to 100Hz
ran multibeast again: Drivers-misc-voodoo ps/2 controller ->reboot Brought back keyboard & lost audio Still no touchpad.
Ran multibeast again. VoodooHDA 0.2.72 ->reboot brought my audio back
Ran Kext Utility in Applications folder. Reboot- Touchpad works.
Installed kext for marvell ethernet rebooted- works
http://www.multiupload.com/9HEZCUI4DQ Link to ethernet kext
Installed VooDoo Battery-reboot-> now battery / charger indicator works (EVEN BOTH BATTERIES!!!)
Anyone care to add?
EDIT---
I will be updating this guide soon, as I have found some bugs to iron out.