P55A-UD3R WORKING (problem: USB 1.1 instead of USB 2.0)

[ParanoidAndroid]

Reporting succesfull instalation on my spec (in sig) with 9600GSO working properly on 1900x1080 resolution. 2 things I can't get working yet, integrated ALC889 audio but foud already topics so I'll give it a try later. What's most important to me is that it seems that USB doesn't work properly. Mouse/Keyboard works fine but I installed drivers to my M-Audio Fast Track Ultra and it's doesn't recognize it when it's connected via USB at all (tried different USB ports but doesn't help)

Are there any kext fixing USB ports?

 

[MacMan]

Re: P55A-UD3R WORKING

Are you using 10.6.3, then install the 10.6.2 USB kext from MultiBeast.

 

[ParanoidAndroid]

Re: P55A-UD3R WORKING

Yes, and I installed that fix but... that's weird. When I connect my Nokia via USB system recognizes it as a stroge device, also my Brother printer seems to work, even the old SpeedTouch modem also appers in connected devices when pluged. But when I connect Fast Track Ultra nothing shows up. When I install drivers alert is shown: "Becouse this computer has no USB 2.0 ports Fast Track Ultra will be limited" User guide says "If your computer doesn't have native USB 2 port, you will see the following alert during installation" and there it is...

I checked computer hardware and in section under USB as a controller appears AppleUSBUHCI 3.9.6 shouldn't it be IOUSBFamily? Dunno, just guessing.

Give me any hints please

EDIT:
and I just forgot, my CPU is shown as i5.

 

[ParanoidAndroid]

Re: P55A-UD3R WORKING

This is what System Profiler shows:

USB Bus:

Host Controller Location: Built-in USB
Host Controller Driver: AppleUSBUHCI
PCI Device ID: 0x3a37
PCI Revision ID: 0x0005
PCI Vendor ID: 0x8086
Bus Number: 0x7d

Fast Track Ultra:

Product ID: 0x2080
Vendor ID: 0x0763 (M-Audio)
Version: 1.51
Speed: Up to 12 Mb/sec
Manufacturer: M-Audio
Location ID: 0x7d100000
Current Available (mA): 500
Current Required (mA): 0

12Mb/sec is USB 1.1 speed. Fast Track Ultra recognize port as 1.1 also. I installed 10.6.2 USB kext from MultiBeast twice, doesn't help at all... Is there any other way to force it to work as USB 2.0?