OsxAptiodrv:Starting overrides for \macOS Install Data\Locked Files\Boot Files\boot.efi

[duuscustommac]

by the way, I opened Config.plist file using CCG. Under Tools Menu/Text Mode and searched the code you have suggested it exists!

 

[Feartech]

by the way, I opened Config.plist file using CCG. Under Tools Menu/Text Mode and searched the code you have suggested it exists!

maybe you have a clover issue, may be worth checking this over:

[Guide] Dell Inspiron 15 7559 (Skylake, i7-6700HQ, Intel HD 530) Using Clover

[Guide] Dell Inspiron 15 7559 (Skylake, i7-6700HQ, Intel HD 530) This guide will show you how i did the full installation of El Capitan on this laptop (specs below). the guide will cover booting OS X with Clover UEFI. Also, the drive you will use will be wiped completely so make sure your...

www.tonymacx86.com

 

[duuscustommac]

maybe you have a clover issue, may be worth checking this over:

[Guide] Dell Inspiron 15 7559 (Skylake, i7-6700HQ, Intel HD 530) Using Clover

[Guide] Dell Inspiron 15 7559 (Skylake, i7-6700HQ, Intel HD 530) This guide will show you how i did the full installation of El Capitan on this laptop (specs below). the guide will cover booting OS X with Clover UEFI. Also, the drive you will use will be wiped completely so make sure your...

www.tonymacx86.com

Thank you for another suggestion!
Glad to try again and again. if it fixes the problems.

Until this moment, I've used creatinstallmedia method,
Do you mean to try using Unibeast for making Bootable USB? If it works, should I refer to the post installation and patching according to the link you've given me?

 

[Feartech]

Thank you for another suggestion!
Glad to try again and again. if it fixes the problems.

Until this moment, I've used creatinstallmedia method,
Do you mean to try using Unibeast for making Bootable USB? If it works, should I refer to the post installation and patching according to the link you've given me?

there is some bits you can take from that guide, however, don't so the dsdt patches:
Search for ‘GFX0’ and replace all with ‘IGPU’
Search for ‘HECI’ and replace all with ‘IMEI’
Search for ‘HDAS’ and replace all with ‘HDEF’

as renames are not required anymore as Whatevergreen.kext takes care of those

FakePCIID_Intel_HD_Graphics.kext is not needed

do not do these in dsdt either:

• [Audio] Audio Layout 3
  • [igpu] Brightness fix
  • [sys] IRQ fix
  • [sys] Skylake LPC
  • [usb] USB3_PRW 0x6D Skylake

but you may want to check on your bios options:

• Restore BIOS defaults
• Disable VT for direct I/O
• Select AHCI under SATA
• Disable Advanced Battery Charging (thanks geboe)
• Select off under SupportAssist System Resolution
• Disable Firmware TPM (thanks jcarcinogen)
• Disable secure boot
• Optional: enable/disable load legacy option rom if you are having trouble booting during the next step
• Optional: acces boot options by pressing F12 on boot. Try "Pheriperial Device Setting (OPROM Setting)" disabled/enabled if you have trouble booting during the next step

 

[duuscustommac]

Thanks for clarifying!
I'll get back to you as soon as I get to some sort of output.

Thanks again,

 

[duuscustommac]

there is some bits you can take from that guide, however, don't so the dsdt patches:
Search for ‘GFX0’ and replace all with ‘IGPU’
Search for ‘HECI’ and replace all with ‘IMEI’
Search for ‘HDAS’ and replace all with ‘HDEF’

as renames are not required anymore as Whatevergreen.kext takes care of those

FakePCIID_Intel_HD_Graphics.kext is not needed

do not do these in dsdt either:

• [Audio] Audio Layout 3
  • [igpu] Brightness fix
  • [sys] IRQ fix
  • [sys] Skylake LPC
  • [usb] USB3_PRW 0x6D Skylake

but you may want to check on your bios options:

• Restore BIOS defaults
• Disable VT for direct I/O
• Select AHCI under SATA
• Disable Advanced Battery Charging (thanks geboe)
• Select off under SupportAssist System Resolution
• Disable Firmware TPM (thanks jcarcinogen)
• Disable secure boot
• Optional: enable/disable load legacy option rom if you are having trouble booting during the next step
• Optional: acces boot options by pressing F12 on boot. Try "Pheriperial Device Setting (OPROM Setting)" disabled/enabled if you have trouble booting during the next step

Just out of curiosity, Will my NVIDIA GeForce GTX 960M and CUDA work?

 

[Feartech]

Just out of curiosity, Will my NVIDIA GeForce GTX 960M and CUDA work?

nope, not supported in dual mode on a hackintosh, sorry

 

[iMax19]

Hi, I have a similar issue. How can I fix it? Thank you

 

[duuscustommac]

for me, i downgrade my bios version from 1.3.0 to 1.0.1. and surprisingly it fixed the problem