- Joined
- Oct 21, 2019
- Messages
- 19
- Motherboard
- ASUS PRIME A320M-K
- CPU
- Intel Core i3-9100F
- Graphics
- MSI Radeon RX 580
Hi everyone.
Yesterday I delete my SSD with mojave who worked perfect and install on my nuc an OS form Roon called Rock.
Today I delete the new os from my ssd and try to install again mojave but I am having a lot of problem.
I have download Mojave unibeast 9
I create a lot of different usb pen (GUID macos journaled) and unibeast works perfect.
I switch on my nuc and made all the change in my bios (already updated)
To start, choose "Load Defaults" (choose from the menu or press F9 in the BIOS setup).
In order to boot the Clover from the USB, you should visit your BIOS settings:
- « Inter VT for directed I/VO (VT-d) » should be disabled
- « Secure Boot » should be disabled
- « Legacy Boot » should be enabled
- « Fast Boot » should be disabled
- Boot->Boot Devices-> « USB » should be enabled
- SATA mode should be AHCI
- Boot->Boot Configuration-> « Boot Network Devices Last » should be disabled
- Power->Secondary Power Settings, « Wake on LAN from S4/S5 », set to « Stay Off »
These settings are important but are already set as needed by « Load Defaults »
- Devices->Video, « IGD Minimum Memory » set to 64mb
- Devices->Video, « IGD Aperture Size » set to 256mb
save the bios, restart the pc, press F10 and this is what i have
All the options bring me to nothing
I cannot make the UEFI partition visible so you can install.
can someone help me?
Yesterday I delete my SSD with mojave who worked perfect and install on my nuc an OS form Roon called Rock.
Today I delete the new os from my ssd and try to install again mojave but I am having a lot of problem.
I have download Mojave unibeast 9
I create a lot of different usb pen (GUID macos journaled) and unibeast works perfect.
I switch on my nuc and made all the change in my bios (already updated)
To start, choose "Load Defaults" (choose from the menu or press F9 in the BIOS setup).
In order to boot the Clover from the USB, you should visit your BIOS settings:
- « Inter VT for directed I/VO (VT-d) » should be disabled
- « Secure Boot » should be disabled
- « Legacy Boot » should be enabled
- « Fast Boot » should be disabled
- Boot->Boot Devices-> « USB » should be enabled
- SATA mode should be AHCI
- Boot->Boot Configuration-> « Boot Network Devices Last » should be disabled
- Power->Secondary Power Settings, « Wake on LAN from S4/S5 », set to « Stay Off »
These settings are important but are already set as needed by « Load Defaults »
- Devices->Video, « IGD Minimum Memory » set to 64mb
- Devices->Video, « IGD Aperture Size » set to 256mb
save the bios, restart the pc, press F10 and this is what i have
All the options bring me to nothing
I cannot make the UEFI partition visible so you can install.
can someone help me?
Attachments
Last edited: