NUC NUC5i7RYH and 10.10.4

[Retio]

Hi there, i have build new NUC:

BASE: NUC5i7RYH
RAM: 2x8GB HyperX Impact
SDD: 256GB SX900 ADATA

I trying boot Hackintosh (10.10.4 ) but after loading text screen get black and nothing show. About 2 months ago I have installed 10.10.3 at old PC, no problem like this.

BIOS (0249):
VT-d disabled
Secure boot disabled
UEFI enabled
Legancy enabled
IGP Min ram 1GB
IGP First HDMI
IGP Second None/

Tryed with params:
-GraphicsEnabler=Yes|No
-npci=0x2000|3000
-IGPEnabler=Yes

Any idea or suggests?

 

[Jithin.C.V]

Hi there, i have build new NUC:

BASE: NUC5i7RYH
RAM: 2x8GB HyperX Impact
SDD: 256GB SX900 ADATA

I trying boot Hackintosh (10.10.4 ) but after loading text screen get black and nothing show. About 2 months ago I have installed 10.10.3 at old PC, no problem like this.

BIOS (0249):
VT-d disabled
Secure boot disabled
UEFI enabled
Legancy enabled
IGP Min ram 1GB
IGP First HDMI
IGP Second None/

Tryed with params:
-GraphicsEnabler=Yes|No
-npci=0x2000|3000
-IGPEnabler=Yes

Any idea or suggests?

Assuming that you are using UniBeast.

Try booting in safe mode (-x)

 

[Retio]

Assuming that you are using UniBeast.

Try booting in safe mode (-x)

Yes, UniBeast, -x not helps. Tryed.

 

[Jithin.C.V]

Yes, UniBeast, -x not helps. Tryed.

-x is also giving black screen??

As per the below thread Iris Pro 6100 which having device id 162B have native support.

http://www.tonymacx86.com/yosemite-...tel-hd4200-hd4400-hd4600-mobile-yosemite.html

You try booting with "dart=0 PCIRootUID=0 -f -v -x" or "dart=0 PCIRootUID=1 -f -v -x"

 

[toleda]

Any idea or suggests?

See Intel Nuc 2.0 (Broadwell) - Page 13
The thread has notes on BIOS settings.
Install the ssdts for graphics and power management.

 

[Retio]

See Intel Nuc 2.0 (Broadwell) - Page 13
The thread has notes on BIOS settings.
Install the ssdts for graphics and power management.

BIOS set but no results. This is for i5, i have i7 5557U version.

Tell me how to install SSDTS?

 

[toleda]

Tell me how to install SSDTS?

Do not use SSDT.aml. You can make your the i7 ssdt.
See Downloads/nuc-i5-5250u"[Guide..."

 

[Retio]

Do not use SSDT.aml. You can make your the i7 ssdt.
See Downloads/nuc-i5-5250u"[Guide..."

Tryed to copy SSDT but with no result. Is there any step by step instruction? Or an other idea what should help.

 

[Mac1]

Tryed to copy SSDT but with no result. Is there any step by step instruction? Or an other idea what should help.

I would start from scratch:

10.10.4
Clover Bootloader (EFI)
- FAKESMC
- Macbook Pro 12,1 (SMBIOS)
Only use framebuffer injection (ig-platform)

This is how I have managed to get mine to boot so far, with graphics acceleration that is (only issue with graphics is I have artifacts). I have not worked on audio yet.

 

[Mac1]

Noticed that when I do not use Safari I no longer get the artifacts/glitches on the display.