- Joined
- Apr 6, 2010
- Messages
- 4
- Mac
- Classic Mac
- Mobile Phone
When I first built the machine in January I could not get sound to work.
When Multibeast first came out I successfully got sound working.
I foolishly upgraded to 10.6.3 and have never got sound to work again.
Today I wiped the disk clean. I burned iBoot to a CD but couldn't get the machine to boot from it, so I instead put the hard disk on my MacBookPro to:
- install 10.6.0
- run the 10.6.2 combo updater
- install gigabeast for GA-P55-UD4
On taking the disk to the Hackintosh it all works perfectly *except* the sound. No input or output devices are found by the Sound system preferences panel, although it looks as if something is recognized in System Profiler:
Intel High Definition Audio:
Device ID: 0x1458A002
Audio ID: 888
Available Devices:
External Microphone:
Connection: 1/8-Inch Jack
External Microphone:
Connection: 1/8-Inch Jack
Line In:
Connection: 1/8-Inch Jack
Headphone:
Connection: 1/8-Inch Jack
Speaker:
Connection: 1/8-Inch Jack
Line Out:
Connection: 1/8-Inch Jack
Line Out:
Connection: 1/8-Inch Jack
Line Out:
Connection: 1/8-Inch Jack
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
(I also tried 10.6.3 with AppleHDA 10.6.2, but no luck)
What should I do next?
When Multibeast first came out I successfully got sound working.
I foolishly upgraded to 10.6.3 and have never got sound to work again.
Today I wiped the disk clean. I burned iBoot to a CD but couldn't get the machine to boot from it, so I instead put the hard disk on my MacBookPro to:
- install 10.6.0
- run the 10.6.2 combo updater
- install gigabeast for GA-P55-UD4
On taking the disk to the Hackintosh it all works perfectly *except* the sound. No input or output devices are found by the Sound system preferences panel, although it looks as if something is recognized in System Profiler:
Intel High Definition Audio:
Device ID: 0x1458A002
Audio ID: 888
Available Devices:
External Microphone:
Connection: 1/8-Inch Jack
External Microphone:
Connection: 1/8-Inch Jack
Line In:
Connection: 1/8-Inch Jack
Headphone:
Connection: 1/8-Inch Jack
Speaker:
Connection: 1/8-Inch Jack
Line Out:
Connection: 1/8-Inch Jack
Line Out:
Connection: 1/8-Inch Jack
Line Out:
Connection: 1/8-Inch Jack
S/P-DIF Out:
Connection: Combo
S/P-DIF In:
Connection: Combo
(I also tried 10.6.3 with AppleHDA 10.6.2, but no luck)
What should I do next?