No boot, after removing, and reinstalling ssd.

[yamvmax]

I had almost a perfectly working hackintosh of Mohave on my asus laptop. I wanted to change my sata ssd to an nvme see, but never could get macos installation to complete. So I popped my previous sata ssd back in, and it starts to boot, but then get the wonderful zero with slash. This makes no sense at all. NOTHING has changed. Any ideas?

 

[Feartech]

I had almost a perfectly working hackintosh of Mohave on my asus laptop. I wanted to change my sata ssd to an nvme see, but never could get macos installation to complete. So I popped my previous sata ssd back in, and it starts to boot, but then get the wonderful zero with slash. This makes no sense at all. NOTHING has changed. Any ideas?

boot verbose

 

[yamvmax]

boot verbose

I rebooted a few times, it finally booted. Not sure I should make a new thread, but no matter what i do, i cant get mohave to fully install on my new Nvme ssd. I have no issues installing on my sata ssd. Ant ideas? Any drivers needed for nvme that sata ssd doesnt use?

 

[Feartech]

I rebooted a few times, it finally booted. Not sure I should make a new thread, but no matter what i do, i cant get mohave to fully install on my new Nvme ssd. I have no issues installing on my sata ssd. Ant ideas? Any drivers needed for nvme that sata ssd doesnt use?

what make and model is your nvme?

 

[yamvmax]

what make and model is your nvme?

Samsung mz-vlb2560 Pulled from a mini desktop. It works fine for windows. But It never completes the install. I even tried Clone Copy. It clones to it, but it wont fully boot. Gotta be some sort of driver, No?

 

[yamvmax]

OK So i got The Carbon clone copy booting adding drivers in drivers64UEFI. The issue i know face, is clover is only showing on boot, if I use my usb to boot. What am i missing? I see no boot option for the SSD when no usb is in. I placed the clover folder to the ssd.

 

[craighazan]

OK So i got The Carbon clone copy booting adding drivers in drivers64UEFI. The issue i know face, is clover is only showing on boot, if I use my usb to boot. What am i missing? I see no boot option for the SSD when no usb is in. I placed the clover folder to the ssd.

Did you move your whole EFI folder to the SSD?

 

[yamvmax]

Did you move your whole EFI folder to the SSD?

Yup. And now it wont boot again. WTF?

I obviously have an issue...I cant boot my usb installer either

 

[craighazan]

If like you say it boots with the USB attached, did I get that right?. Perhaps copy the EFI from the USB to the SSD. Have you tried that? And what about the NVMe driver that you install via Clover configurator, was that installed on the USB?.

 

[yamvmax]

If like you say it boots with the USB attached, did I get that right?. Perhaps copy the EFI from the USB to the SSD. Have you tried that? And what about the NVMe driver that you install via Clover configurator, was that installed on the USB?.

What nvme driver??? Maybe thats my issue. Mohave I thought natively supports nvme.