No Audio Devices - Realtek ALC AppleHDA [Guide]

[toleda]

Procedure/Guide Used:

• https://github.com/toleda/audio_RealtekALC/blob/master/DETAILS.md

The attached AppleHDA.kext shows you ran audio_cloverALC-100.command, not audio_realtekALC-100.command as noted above. The config.plist does not show audio_cloverALC-100.command patches.
No need to try ALC injection or Clover/HDEF.
Download and run audio_cloverALC-100.command.zip
Reply with Terminal Output and attach updated files.

 

[TylerWorth]

The attached AppleHDA.kext shows you ran audio_cloverALC-100.command, not audio_realtekALC-100.command as noted above. The config.plist does not show audio_cloverALC-100.command patches.
No need to try ALC injection or Clover/HDEF.
Download and run audio_cloverALC-100.command.zip
Reply with Terminal Output and attach updated files.

Thank you. I will try thus again. So you said I rand the alc clover before and to do it again. And give you results. Just curious. I will try tonight or tomorrow.


EDIT I have sound now but when i put it to sleep it goes to half volume but the volume bar says its max

 

[edz0920]

Hi,

I don't have any audio. Here's my problem report:



1. No Audo Devices Appear (NO CODEC)
2. OSX Yosemite 10.10.2 / FOXCONN P67A - P67A-S / Bios Version A46F1020 / Intel i7 2600/ Nvidia GT 240
3. Procedure Used: This Guide, I suppose
4. (Attached - Inside the Zip)
5. (Attached - Inside the Zip)
6. (Attached - Inside the Zip)
7. (Attached - Inside the Zip)
8. (Attached - Inside the Zip)
9. Not Available
10. (Attached - Inside the Zip)
11. Not Available

 

[toleda]

1. No Audo Devices Appear (NO CODEC)

AppleHDA.kext is damaged.
MultiBeast 7 - Select: Drivers > Audio > Realtek ALCxxx > √ ALC887 current.

 

[tonymac_addict]

Hello Toleda,

I'm having some issues with my setup of an ALC1150. It was working fine up until the moment I changed my GPU (My GTX770 went faulty and had the chance to get a R9 290x instead)

All is working but audio...

You have my OSX Version and hardware in the screenshot.
In addition to that info am using :
Motherboard : Gyigabyte Z97X Gaming 3 with F5 BIOS

Originally I used Multibeast Maverik to install the AppleHDA.kext.

After 10.10.2 update, sound was gone, so I used Multibeast Yosemite and installed it again using the ALC1150 driver + Optional EFI Installed Bootloader Support.

Attached you have an archive with the requested information. Hope you can help.

BTW sound is working on Windows

Regards
Chris

 

[edz0920]

AppleHDA.kext is damaged.
MultiBeast 7 - Select: Drivers > Audio > Realtek ALCxxx > √ ALC887 current.

You sir.. are a genius! I love you now. I have sounds! YAY!

 

[toleda]

After 10.10.2 update, sound was gone, so I used Multibeast Yosemite and installed it again using the ALC1150 driver + Optional EFI Installed Bootloader Support.

Console/All Messages is not helpful
debug.log is missing
Audio codec is disabled, verify BIOS/Peripherals/Audio Controller/Enabled
No OS X audio until the codec appears in DPCIManager/Status.

 

[markbm]

Thank you Toleda. I did verify that I have Rev 1.0 and have unplugged the green port, and only have the orange and black line outs plugged in.


Can you clarify how I verify "BIOS/Advanced/Audio Controller/Enabled"? Am I opening up the AppleHDA.kext file to look for some type of text? Do I need to reboot and go into bios to look for a particular setting?


Als, on the recommended step "MultiBeast 7.1.1 - Select: Drivers > Audio > Realtek ALCxxx > √ ALC 898" I've done this several times, just want to make sure I need to do again..


Thanks for your help,


Mark

 

[toleda]

Do I need to reboot and go into bios to look for a particular setting?

Yes.

 

[toleda]

I have an Asus k53sv laptop and my sound is Realtek ALC269

Desktop Only