No Audio Devices - Realtek ALC AppleHDA [Guide]

[toleda]

I've already tried this way but nothing has changed.

What did you do?

 

[Antomac88]

The guide: Before You Install Audio/MultiBeast/Post #2

 

[toleda]

The guide

Attach IOReg.

 

[Antomac88]

Thank you Toleda.
I hope I've uploaded the right file you need

 

[toleda]

uploaded the right file

Correct, see Post #1/Problem Reporting; attach all remaining requested files

 

[jkokura]

II. Problem Reporting (post to this thread with files)

1. Description of audio problem: No Devices Found
2. OS X version/motherboard model/BIOS version/processor/graphics: Sierra 10.12.4, GA-H110N, Unsure of Bios Version, i5 6600K, onboard Graphics (Intel 530?)
3. Procedure/Guide Used (Realtek ALC AppleHDA, Post #1)
   1. MultiBeast/Audio Selections: ACL887/888b, optional HDMI, optional 5.1, Intel 100/200 series checked
   2. Terminal/Shell/File/Export Text As. . . (if Terminal script run) This is where I don't understand - I'm new to using the terminal at all.
      1. realtekALC
      2. AppleHDA8Series
      3. cloverALC
      4. pikeralphaALC
4. Audio/ALC Injection (Tools 3.) Attached
   1. Double click/Downloads/audio_codecdetect.command
   2. Terminal/Shell/File/Export Text As. . .
5. Copy of IOReg (Tools 2./1.) or IOJones (Tools 2./2.), Attached
   1. IOReg/File/Save a Copy As…, verify file (no ioreg.txt)
   2. IOJones/File/Save..
6. System/Library/Extensions/AppleHDA.kext (10.11, search: show hidden files) Couldn't find it
7. System/Library/Extensions/AppleHDAxxx.kext (if installed) Couldn't find it (perhaps not there?)
8. Console/All Messages/kernel Sound Assertions - select/Save Selection As: Don't know how to use Console, but I found it in Utilities. Using the Search bar for Kernel produced 0 results.
9. Screen shots:
   1. DPCIManager/Status (Tools 1.) Attached
   2. System Information/Hardware/Audio/Intel High Definition Audio (not Devices) Attached
10. Terminal/Shell/Export Test As. . . (if script used) Don't know how to do this, but I think I could learn this one if pointed the right way.
    1. audio_cloverALC-110...command
    2. audio_realtekALC-110...command
    3. AppleHDA8Series.sh
    4. audio_pikeralphaALC-110...command
11. Chameleon (if installed) I didn't install Chameleon
    1. Extra/org.chameleon.Boot.plist
    2. DPCIManager/Misc/Boot Log (Tools 1.)
    3. Extra/dsdt.aml (if installed)
    4. Extra/ssdt.aml (if installed)
12. Clover (if installed) I used Multibeast, so did I also use Clover?
    1. EFI/CLOVER/config.plist
    2. DPCIManager/Misc/Boot Log (Tools 1.)
    3. EFI/CLOVER/ACPI/patched/dsdt.aml (if installed)
    4. EFI/CLOVER/ACPI/patched/ssdt.aml (if installed)

Thanks in advance, Jacob

 

[Antomac88]

1. No device found
   
2. OS X 10.12 / Gigabyte Z170-HD3P / BIOS standard version / Intel i7 6700k / Geforce GTX 750Ti
3. Procedure/Guide Used (Realtek ALC AppleHDA, Post #1)
   1. MultiBeast/Audio Selections: ACL887/888b, optional HDMI, Intel 100/200 series
      
   2. I don't understand
      1. realtekALC
      2. AppleHDA8Series
      3. cloverALC
      4. pikeralphaALC
4. Audio/ALC Injection (file attached)
5. Copy of IOReg (file attached)
   
6. (File attached)
7. There isn't this file
   
8. There aren't no file with this name: kernel Sound Assertions
9. Screen shots:
   1. (File attached)
   2. (File attached) - now I'm connect to TV via Hdmi port
10. Terminal/Shell/Export Test As. . . (file attached)
11. Chameleon (not installed)
12. Clover 4.42.1 (if installed)
    1. file attached
       
    2. file attached
       
    3. not installed
    4. not installed)

 

[toleda]

No device found

Script failed, network problem.
Use Audio ID: 1 not 3.
Run cloverALC when internet is available.
Reply with new files.

 

[Antomac88]

Ok sorry if I did not connect the computer to the network
I did a test using ID 3
And then using a test using ID 1

I attach the two files

 

[toleda]

attach the two files

Restart, attach new files; all.