No Audio Devices - Realtek ALC AppleHDA [Guide]

[Oullim]

Hi all I've just installed El Capitan on my Hackintosh, though the audio doesn't seem to work even after downloading kext scripts. Could anyone help? My audio is ALC892. Also For some reason my Clover doesn't seem to effect anything how do I fix this?

 

[primac]

By design, cloverALC does run with SIP enabled.
Something is causing a kext cache rebuilt with SIP enabled. Not an audio problem.

Makes sense. Looks like I am not the only one with this issue, I've seen a few people in this thread that have the same problem: http://www.tonymacx86.com/el-capita...hanges-workarounds-current-information-9.html

Thank you for your help.

 

[toleda]

audio doesn't seem to work

See Problem Reporting, Post #1. Attach all requested files.

 

[tominabox1]

1. Back again - decided to update to 10.11.3, lost audio and can't seem to bring it back, no devices show in prefs
2. 10.11.3/Asrock H97m-itx/ac/1.08/i5 4560/gtx960
3. tried multibeast 8, cloverALC, AppleHDA8Series, none worked
4.

File: audio_codecdetect.command_v1.2

HDMI audio codec(s)


Onboard audio codec
Realtek: 0x10ec0892


Codec: ALC892
Device: HDEF@1B
Audio ID: 1


Valid audio codec, audio device and Audio ID; Audio/ALC Injection: OK
Finished

5. attached
6. attached
7. attached
8. attached
9. attached
10. attached
11. NA
12. attached

 

[tominabox1]

Figured it out I think. I restored the stock HDA kext, ran audio_cloverALC-110_v1.0o11.command and saw a lot of SMC errors so I re-did the multibeast install of the FakeSMC, re-ran cloverALC, and made sure CSRactive config was set to 0x11, now audio is working again

1. Back again - decided to update to 10.11.3, lost audio and can't seem to bring it back, no devices show in prefs
2. 10.11.3/Asrock H97m-itx/ac/1.08/i5 4560/gtx960
3. tried multibeast 8, cloverALC, AppleHDA8Series, none worked
4.

File: audio_codecdetect.command_v1.2

HDMI audio codec(s)


Onboard audio codec
Realtek: 0x10ec0892


Codec: ALC892
Device: HDEF@1B
Audio ID: 1


Valid audio codec, audio device and Audio ID; Audio/ALC Injection: OK
Finished

5. attached
6. attached
7. attached
8. attached
9. attached
10. attached
11. NA
12. attached

 

[alemate23]

Hi, this is my first request for an audio problem on my new hackintosh. My mobo is a gigabyte ga-h81m-s2h with alc887 audio onboard. I've installed alc887 audio codec legacy with audioClover_Alc script and audioCloverHDMI script to get hdmi audio working, but i have only my hdmi monitor in audio output and i can't use speakers and headphone connected to motherboard. With DCPIManager the audio codec field is empty.

I've also tried voodooHDA, with it i can use my speakers but no hdmi audio.

Any suggestions? I've tried to reset codec but no luck

 

[toleda]

With DCPIManager the audio codec field is empty.

No codec, no audio. Verify BIOS/HD Audio/Enabled
AppleHDA.kext is useless; install native AppleHDA.kext

 

[alemate23]

In bios hd audio is enabled

 

[toleda]

In bios hd audio is enabled

Not working, no audio.

 

[alemate23]

Today I boot my hack and in dpcimanager (see attachments). The codec name is alc888b. Very strange