No audio after 10.6.4 + MultiBeast (GA-P55-UD5)

[uukk]

Hi guys, i'm just installed the SL in my system but after apply 10.6.4 and MultiBeast (I've watch the proper video for my mobo) with DSDT.aml for BIOS F10.
After the installation of 10.6.0 the audio works fine but now in the System Profile I see:

High Definition Audio Intel 885

this is wrong.

What's append?

What can I do for enable native audio ALC889a

thanks...

 

[Lnx2Mac]

The options for the GA-P55-UD5 should be identical to the ones for the P55M-UD4, as I blogged in http://lnx2mac.blogspot.com/

Good Luck !
Lnx2Mac

 

[MacMan]

Hi guys, i'm just installed the SL in my system but after apply 10.6.4 and MultiBeast (I've watch the proper video for my mobo) with DSDT.aml for BIOS F10.
After the installation of 10.6.0 the audio works fine but now in the System Profile I see:

High Definition Audio Intel 885

this is wrong.

What's append?

What can I do for enable native audio ALC889a

thanks...

ALC889a = 885, as letters aren't allowed in device id's.

 

[uukk]

The options for the GA-P55-UD5 should be identical to the ones for the P55M-UD4, as I blogged in http://lnx2mac.blogspot.com/

Thanks a lot for the link, i've understand the problem follow your explanations...

 

[uukk]

ALC889a = 885, as letters aren't allowed in device id's.

Ok, this is correct then.

Many thanks to all the stuff, tonymacx86 blog help me to build a very stable and fast system.
I've follow the build system recommendations show in this site and i'm very happy.

Thanks a lot at all.

 

[ltpitt]

How did you do it (step by step)?

I did everything for my ga-p55-ud5 I just miss audio