Contribute
Register

No acceleration on Mojave with Intel HD 530

Status
Not open for further replies.
Joined
Mar 15, 2020
Messages
38
Motherboard
ASUS Z170 PRO GAMING
CPU
i7-6700K
Graphics
GTX 1070 / HD 530
Mac
  1. MacBook Air
Mobile Phone
  1. iOS
Had a glitching problems with iGPU on High Sierra, so i decided to update to Mojave. After a two days of troubleshooting I've booted to MacOS.
But there is no acceleration (dock is solid & 7Mb memo) and my monitors are not being recognized in system, so they mirror each other (even in the BIOS though).
Before the boot I have an "[IGPU] Graphics driver failed to load: could not register with Framebuffer driver!" message, and about a minute of waiting.
I've tried a lot of guides, but it seems that I'm too stupid to figure it out on my own.
Im using a 5120 version clover and here's my EFI:
 
Had a glitching problems with iGPU on High Sierra, so i decided to update to Mojave. After a two days of troubleshooting I've booted to MacOS.
But there is no acceleration (dock is solid & 7Mb memo) and my monitors are not being recognized in system, so they mirror each other (even in the BIOS though).
Before the boot I have an "[IGPU] Graphics driver failed to load: could not register with Framebuffer driver!" message, and about a minute of waiting.
I've tried a lot of guides, but it seems that I'm too stupid to figure it out on my own.
Im using a 5120 version clover and here's my EFI:
Inject Intel should be set to false
 
So much wrong here.

These two do the same job and are mutually exclusive :

Screenshot 2020-08-02 at 10.44.40.png


These two do the same job and are mutually exclusive :

Screenshot 2020-08-02 at 10.46.04.png


These should be updated :

Screenshot 2020-08-02 at 10.47.17.png


Too many incorrect/unnecessary fixes enabled :

Screenshot 2020-08-02 at 10.49.03.png


Screenshot 2020-08-02 at 10.49.14.png


Not required with Lilu/WhateverGreen.kext :

Screenshot 2020-08-02 at 10.51.06.png



Not required :

Screenshot 2020-08-02 at 10.52.23.png



Remove :

Screenshot 2020-08-02 at 10.53.41.png



Remove :

Screenshot 2020-08-02 at 10.54.33.png



Deselect both :

Screenshot 2020-08-02 at 10.55.21.png



Why all of these kernel patches ?

Screenshot 2020-08-02 at 10.56.50.png



Should be Yes :

Screenshot 2020-08-02 at 11.00.21.png



iMac17,1 is a poor choice of SMBIOS as it has Radeon graphics.
 
@P1LGRIM
removed OsxAptioFixDrv.efi and apfs.efi, Acpi patch, -disablegfxfirmware, ids, VBios and all kernel patches, Inject Kexts set to Yes.
Clover Configurator show no updates to kexts you selected.
There is still no acceleration, but [IGPU] error message seems to be gone. Now it is stuck for a minute on

Code:
EXC_RESOURCE -> MRT[53] exceeded mem limit: InactiveSoft 50 MB (non-fatal)
IMG_5015.JPG

What fixes i should disable?
 
Last edited:
That was very useful, thank you. I removed ones that seemed to be unnecessary, the good news is that the mem limit error gone away, but the [IGPU] error is still there, in fact, it is being printed again after a minute of waiting.
Here's my latest config.plist:
 
Status
Not open for further replies.
Back
Top