- Joined
- Mar 5, 2014
- Messages
- 6
- Motherboard
- GA-Z87-UD3H
- CPU
- i7-4770K
- Graphics
- GeForce GTX 750ti
- Mac
- Classic Mac
- Mobile Phone
Hey guys I have a:
GA-Z87-UG3H
Intel I7-4770K
Onboard Graphics
Monoprice ISP-Zero-G
10.9.2 Running Good (Minus Sleep)
In Fedora Linux, I get the full resolution of the 2560X1440. In OSX though my max resolution is 1920X1080. I've been trying to search and apologize if it was overlooked. How can I get the resolution to show correctly?
Edit:
Alright so I found that with the boot flags I can use:
This allows me to achieve the resolution of 2560X1440. The problem though is that the screen is constantly flickering on and off. Sometimes it will stay off for a couple seconds and come back. I also tried some of the other boot flags from http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera.html
0D220003 - Gives me 1920X1080
04160000 - Gives 2560X1440 but has flicking same as 04260000
04120004 - Would not boot Kernel Panic
I can get the resolution, just not without the flickering and dropping of picture.
I read on the specs for the u3gh motherboard and see I should be able to support these resolutions.
Please help... I keep searching and trying other things in the threads found, but cannot seem to find what is causing this.
I tried using a Rocketfish Displayport to DVI-D with the same boot flags and am unable to boot. If I take out the adaptor and put back in the HDMI to DVI-D, it boots up. Still the 1920X1080 though.
GA-Z87-UG3H
Intel I7-4770K
Onboard Graphics
Monoprice ISP-Zero-G
10.9.2 Running Good (Minus Sleep)
In Fedora Linux, I get the full resolution of the 2560X1440. In OSX though my max resolution is 1920X1080. I've been trying to search and apologize if it was overlooked. How can I get the resolution to show correctly?
Edit:
Alright so I found that with the boot flags I can use:
Code:
<key>IGPlatformID</key>
<string>04260000/string>
This allows me to achieve the resolution of 2560X1440. The problem though is that the screen is constantly flickering on and off. Sometimes it will stay off for a couple seconds and come back. I also tried some of the other boot flags from http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera.html
0D220003 - Gives me 1920X1080
04160000 - Gives 2560X1440 but has flicking same as 04260000
04120004 - Would not boot Kernel Panic
I can get the resolution, just not without the flickering and dropping of picture.
I read on the specs for the u3gh motherboard and see I should be able to support these resolutions.
Please help... I keep searching and trying other things in the threads found, but cannot seem to find what is causing this.
I tried using a Rocketfish Displayport to DVI-D with the same boot flags and am unable to boot. If I take out the adaptor and put back in the HDMI to DVI-D, it boots up. Still the 1920X1080 though.