Contribute
Register

New RehabMan kexts/builds/binaries for Yosemite

Status
Not open for further replies.
Hi RehabMan,

i've installed debug version of CodecCommander, here is the log:

Code: 
31/10/14 09:24:11,000 kernel[0]: CodecCommander: version 2.2.0 starting31/10/14 09:24:11,000 kernel[0]: CodecCommander: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/HDEF@1B is unreachable
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: commander initializing
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: board make - DELL
31/10/14 09:24:11,000 kernel[0]: CodecCommander: version 2.2.0 starting
31/10/14 09:24:11,000 kernel[0]: CodecCommander:  r: ICW stored get command 0x1f0004
31/10/14 09:24:11,000 kernel[0]: CodecCommander:  r: ICB was set, sending verb over the link
31/10/14 09:24:11,000 kernel[0]: CodecCommander:  r: codec responded: 0xffffffff
31/10/14 09:24:11,000 kernel[0]: CodecCommander: rw: IRV cleared, allowing new commands
31/10/14 09:24:11,000 kernel[0]: CodecCommander: start node 0xff, total 0x0
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: --> getting EAPD supported node list (limited to 5)
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: infinite workloop requested, will start now!
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: --> awake
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: --> workloop started
31/10/14 09:24:30,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:35,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:41,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:46,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:51,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:56,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:25:02,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:25:07,000 kernel[0]: CodecCommander: cc: --> hda codec lost power
31/10/14 09:25:23,000 kernel[0]: CodecCommander: cc: --> asleep
31/10/14 09:25:48,000 kernel[0]: CodecCommander: cc: --> awake
31/10/14 09:25:48,000 kernel[0]: CodecCommander: cc: --> resetting codec
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICW stored set command 0x17ff00
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICB was set, sending verb over the link
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: IRV was set by hardware
31/10/14 09:25:48,000 kernel[0]: CodecCommander: rw: IRV cleared, allowing new commands
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICW stored set command 0x17ff00
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICB was set, sending verb over the link
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: IRV was set by hardware
31/10/14 09:25:48,000 kernel[0]: CodecCommander: rw: IRV cleared, allowing new commands
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICW stored set command 0x170503
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICB was set, sending verb over the link
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: IRV was set by hardware
31/10/14 09:25:48,000 kernel[0]: CodecCommander: rw: IRV cleared, allowing new commands
31/10/14 09:25:48,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:25:48,000 kernel[0]: CodecCommander: cc: --> workloop started
31/10/14 09:25:54,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:25:59,000 kernel[0]: CodecCommander: cc: --> hda codec power restored


i've put to update node 20 and node 21 in the Info.plist, but after sleep still no audio :(
 
DEAR SIR,
I HAVE Sony Vaio Laptop, i3 3rd Generation 1.9GHZ, 6GB RAM DDR3, Model No: SVF152C1WW, 500 GB, INTEL HD GRAPHICS 4000 - 1GB.
DUAL BOOTING WINDOWS 8.1 AND YOSEMITE, ETHERNET ALSO WORKING.
EVERYTHING IS WORKING FINE EXCEPT WIFI.
HOW I CAN START WIFI FOR PERFECT LAPTOP WITH YOSEMITE
THANKS.
 
stich86 said:
Hi RehabMan,

i've installed debug version of CodecCommander, here is the log:

Code: 
31/10/14 09:24:11,000 kernel[0]: CodecCommander: version 2.2.0 starting31/10/14 09:24:11,000 kernel[0]: CodecCommander: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/HDEF@1B is unreachable
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: commander initializing
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: board make - DELL
31/10/14 09:24:11,000 kernel[0]: CodecCommander: version 2.2.0 starting
31/10/14 09:24:11,000 kernel[0]: CodecCommander:  r: ICW stored get command 0x1f0004
31/10/14 09:24:11,000 kernel[0]: CodecCommander:  r: ICB was set, sending verb over the link
31/10/14 09:24:11,000 kernel[0]: CodecCommander:  r: codec responded: 0xffffffff
31/10/14 09:24:11,000 kernel[0]: CodecCommander: rw: IRV cleared, allowing new commands
31/10/14 09:24:11,000 kernel[0]: CodecCommander: start node 0xff, total 0x0
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: --> getting EAPD supported node list (limited to 5)
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: infinite workloop requested, will start now!
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: --> awake
31/10/14 09:24:11,000 kernel[0]: CodecCommander: cc: --> workloop started
31/10/14 09:24:30,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:35,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:41,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:46,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:51,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:24:56,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:25:02,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:25:07,000 kernel[0]: CodecCommander: cc: --> hda codec lost power
31/10/14 09:25:23,000 kernel[0]: CodecCommander: cc: --> asleep
31/10/14 09:25:48,000 kernel[0]: CodecCommander: cc: --> awake
31/10/14 09:25:48,000 kernel[0]: CodecCommander: cc: --> resetting codec
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICW stored set command 0x17ff00
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICB was set, sending verb over the link
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: IRV was set by hardware
31/10/14 09:25:48,000 kernel[0]: CodecCommander: rw: IRV cleared, allowing new commands
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICW stored set command 0x17ff00
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICB was set, sending verb over the link
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: IRV was set by hardware
31/10/14 09:25:48,000 kernel[0]: CodecCommander: rw: IRV cleared, allowing new commands
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICW stored set command 0x170503
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: ICB was set, sending verb over the link
31/10/14 09:25:48,000 kernel[0]: CodecCommander:  w: IRV was set by hardware
31/10/14 09:25:48,000 kernel[0]: CodecCommander: rw: IRV cleared, allowing new commands
31/10/14 09:25:48,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:25:48,000 kernel[0]: CodecCommander: cc: --> workloop started
31/10/14 09:25:54,000 kernel[0]: CodecCommander: cc: --> hda codec power restored
31/10/14 09:25:59,000 kernel[0]: CodecCommander: cc: --> hda codec power restored


i've put to update node 20 and node 21 in the Info.plist, but after sleep still no audio :(
Click to expand...

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply to an ioreg from any other version of IORegistryExplorer.app.
 
cjsm said:
DEAR SIR,
I HAVE Sony Vaio Laptop, i3 3rd Generation 1.9GHZ, 6GB RAM DDR3, Model No: SVF152C1WW, 500 GB, INTEL HD GRAPHICS 4000 - 1GB.
DUAL BOOTING WINDOWS 8.1 AND YOSEMITE, ETHERNET ALSO WORKING.
EVERYTHING IS WORKING FINE EXCEPT WIFI.
HOW I CAN START WIFI FOR PERFECT LAPTOP WITH YOSEMITE
THANKS.
Click to expand...

WiFi: Depends on having compatible hardware. Use DPCIManager->PCI List to find out what you have. Compatible chipsets and the procedures for making them work are covered here: http://www.tonymacx86.com/network/104850-guide-airport-pcie-half-mini-v2.html


Please provide complete details in your profile/signature
(Profile/Settings link in upper right corner of this site)

System: manufacturer/model + bootloader(Clover/Chameleon/Chimera)
CPU: detailed CPU model + motherboard chipset
Graphics: all graphics devices + laptop internal screen resolution

For example, typical Ivy laptop:
System: HP ProBook 4540s (Clvoer)
CPU: i5-3320m/HM76
Graphics: HD4000, 1366x768

Use CPU-Z on Windows to find CPU (Core iX-xxx) and motherboard chipset (HMxx), and graphics capabilities. For a laptop, these details are important and affect critical installation procedures.
 
20141031_184548.jpg

this is my pci list of laptop
 
Lots of thanks sir for ur kind reply.

If i put my dell latitude 630 wifi card in this laptop will it work, i have read in wikipidea dell latitude 630 wifi work in osx
 
cjsm said:
Lots of thanks sir for ur kind reply.

If i put my dell latitude 630 wifi card in this laptop will it work, i have read in wikipidea dell latitude 630 wifi work in osx
Click to expand...

Read at link provided in post #146. It has a list of devices that are supported. All others are not supported.
 
stich86 said:
here is my ioreg
Click to expand...

This, I think, indicates a problem:
Code: 
starting31/10/14 09:24:11,000 kernel[0]: CodecCommander: IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/HDEF@1B is unreachable

Yet I can see it clearly in ioreg...

Not sure what is going on. It would require more debugging on your end. Hopefully you have some C++/dev experience.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top