Need help on fixing USB 3.0 El Capitan - Stuck with USB 2.0

[SebDub]

Hi everyone.
I would like to get from USB 2.0 to USB 3.0. ?
I'm stuck, some help would be real nice.
Is there something missing ?
Is there something else I can do try to get USB 3 ?

I've tried a few time to get this right with all step from the USB 3 guide.

I've made the following steps:
El capitan 10.11.1, with clover. Mobo : giga-UD5H serie 9

Add to clover :

1. change _OSI to XOSI /HEX 5F4F5349 / HEX 584F5349
2. change EHC1 to EH01 / 45484331 / 45483031
3. change EHC2 to EH02 / 45484332 / 45483032

The simulation windows from Rehabman
Add to EFI/Clover/ACPI/patched


Add kexts
FakePCIID_XHCIMux.kext
FakePCIID.kext
USBInjectAll.kext
XHCI-9-series.kext

 

[RehabMan]

Hi everyone.
I would like to get from USB 2.0 to USB 3.0. ?
I'm stuck, some help would be real nice.
Is there something missing ?
Is there something else I can do try to get USB 3 ?

I've tried a few time to get this right with all step from the USB 3 guide.

I've made the following steps:
El capitan 10.11.1, with clover. Mobo : giga-UD5H serie 9

Add to clover :

1. change _OSI to XOSI /HEX 5F4F5349 / HEX 584F5349
2. change EHC1 to EH01 / 45484331 / 45483031
3. change EHC2 to EH02 / 45484332 / 45483032

The simulation windows from Rehabman
Add to EFI/Clover/ACPI/patched


Add kexts
FakePCIID_XHCIMux.kext
FakePCIID.kext
USBInjectAll.kext
XHCI-9-series.kext

http://www.tonymacx86.com/el-capitan-laptop-support/173616-guide-10-11-usb-changes-solutions.html

From your description, you're probably running into the port limit. Since you're using FakePCIID_XHCIMux and USBInjectAll.kext, you should probably use kernel flag -uia_exclude_hs

 

[SebDub]

I'll try this.
I put this into 'custom flags' in clover ?


thanks

 

[SebDub]

Alright the Flag must not be written correctly or this is simply not the solution. Here you can see I got USB 2 and USB 3 but no device will show up under USB 3... in fact they are all connected to USB 3 on the back of the Mobo.

Thank for help.

 

[RehabMan]

Alright the Flag must not be written correctly or this is simply not the solution. Here you can see I got USB 2 and USB 3 but no device will show up under USB 3... in fact they are all connected to USB 3 on the back of the Mobo.

Thank for help.

If you you're using FakePCIID_XHCIMux, all USB2 devices connected to XHCI will route to EHCI, which will result in exactly what you see.

To test USB3, you need to use USB3 devices.

 

[SebDub]

indeed. you were right.
USB 3.0 device work and showup under USB 3.0.
IT WORK !!!

I Hope this post will help other stuck at this stage of fixing USB ports...

Thank you so much