Contribute
Register

Multibeast fails to install

Status
Not open for further replies.
dreamtuned

dreamtuned

Joined
Mar 28, 2016
Messages
70
Motherboard
GA-H81M-S
CPU
Intel i7 4790, 3.60GHz
Graphics
GeForce GT 730
Mac
  1. iMac
Classic Mac
  1. 0
Mobile Phone
  1. 0
Hi to all,

This thread is a continuation from the thread I began here.


In short.

My system information:

Intel Core i7, 4790, 3.60GHz
16GB DDR3 Ram
HD Seagate 2TB
Motherboard: Gigabyte H81M-S
Graphic Card: Nvidia GT210, Philips 234E monitor connected through HDMI cable.

Before installing El Capitan I did update to BIOS. Then when installed it gave me an error "You shut down your computer because of an error" and automatically restarts. I was not able to install the Multibeast El Capitan. I tried to enter desktop in safe mode in order to install the multibeast and it worked, but was not able to install multibeast because it says "failed, check the log". So here is the log:

04/08/16 19:43:11 - Starting MultiBeast 8.1.0-20160306
04/08/16 19:44:51 - Installing 'Bootloaders > Clover v2.3k r3320 UEFI Boot Mode'
04/08/16 19:44:54 - Install of 'Clover_v2.3k_r3320-UEFI.pkg' failed.
'installer: Package name is Clover v2.3k r3320 EFI bootloader
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.
04/08/16 19:45:05 - Starting MultiBeast 8.1.0-20160306
04/08/16 19:45:30 - Installing 'Bootloaders > Clover v2.3k r3320 UEFI Boot Mode'
04/08/16 19:45:33 - Install of 'Clover_v2.3k_r3320-UEFI.pkg' failed.
'installer: Package name is Clover v2.3k r3320 EFI bootloader
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.
04/08/16 19:47:53 - Installing 'Bootloaders > Clover v2.3k r3320 UEFI Boot Mode'
04/08/16 19:47:56 - Install of 'Clover_v2.3k_r3320-UEFI.pkg' failed.
'installer: Package name is Clover v2.3k r3320 EFI bootloader
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.
04/08/16 20:08:07 - Installing 'Bootloaders > Clover v2.3k r3320 UEFI Boot Mode'
04/08/16 20:08:10 - Install of 'Clover_v2.3k_r3320-UEFI.pkg' failed.
'installer: Package name is Clover v2.3k r3320 EFI bootloader
installer: Installing at base path /
installer: The install failed (The Installer encountered an error that caused the installation to fail. Contact the software manufacturer for assistance.)
'. Exiting.
Click to expand...
 
I can't even install UEFI Clover from the post-installation tools here.
 
dreamtuned said:
When I enter those commands in terminal and I hit enter nothing happens.
Click to expand...

Ok I figured it out. I needed to manually write the commands instead of copy/paste.

I will now delete the problematic kexts.
 
[SUP]As far as I can understand only the bold is the kext I need to delete with the command [/SUP]sudo rm -rf <mkext_flag>Custom kexts and repository directories are not allowed when updating system kext caches.
usage: kextcache <mkext_flag> [options] [--] [kext or directory] ...
kextcache -prelinked-kernel <filename> [options] [--] [kext or directory]
kextcache -system-prelinked-kernel
kextcache [options] -prelinked-kernel
kextcache -invalidate <volume>
kextcache -update-volume <volume> [options]
kextcache -system-caches [options]
 
I was not able to change anything :/
 
Now when El cap boots it is all fine for couple of minutes and then restarts automatically. This is the 2nd day I mess with El cap with no success.

If I can't installed it soon I will be forced to insall Yosemite once again since I must work.

Any help guys?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top