Multibeast 3.6 issues with keyboard and others

[iq860]

hello i have a
GA EP43-UD3L F9 Rev 1.0 (ALC888)
Intel Q8300 2.5/4
4 GB RAM Kingston 2x2
ATI HD 5770 1GB PowerColor

i installed SL 10.6.3 retail and updated to 10.6.7 successfully and used Multibeast 3.6
now when i log in my Microsoft PS2 keyboard is not responding and i used a PS2 to USB and the same result
but when i boot using iBoot it works again !!

what to do ? thanx for ur help in advance

my other problems :_
-no audio "tried every option"
-cant but PC to sleep !
-all my HDDs don't show up on desktop / only after DSDT are read as external

i used "DSDT Auto patcher" and it gave me a DSDT and used that with Multibeast and sleep worked

Can some one help me with a DSDT generation no threads are active now on making one form me

 

[SnapMan]

In MultiBeast in Drivers>>Kexts>>Miscellaneous there is a kext called Voodoo PS/2 Controller, that should solve at least one issue....

Are your drives SATA or IDE? Look in Disk, there are 3 kexts for different SATA and IDE, perhaps one of them will help.

Your MB has Realtek ALC888 codec, if you used a DSDT then AppleHDARollBack and Realtek8xxHDA might help. Check Extra>>Extensions to make sure you don't have any other audio kexts installed as they can conflict with each other.

Always run system utilities when adding or removing kexts.

 

[iq860]

Thanx SnapMan for ur attention
I did every thing u said exept for the HHD part im gonna try it now
Ad for the keyboard and sound could a well configerd dsdt do the trick

 

[Trimakas]

That voodoo Ps/2 controller did the trick for me too..

Also get a kext installer.. I am using something called Kext Helper b7.. it comes with an installer and this utility that I think cleans everything up for you..

Let us know if you get it going!

 

[iq860]

Can someone help me make my own DSDT i think it will solve a lot of my problems
No sound
Hard disks not read as internal
Key board (main problem)
The LGA 775 dsdt supmission thread is not active any more !!

 

[SnapMan]

Did Voodoo PS/2 not work?

So, all your drives show up, only not as internal? If so try:

IOAHCI Block Injector kext.>>>Makes drives appear as internal. Installed in /Extra/Extensions. Install with System Utilities tasks.

If the KB and audio work with iBoot then the required parts should be in MultiBeast.

Can you tell us what is in your Extra>>Extensions folder?

 

[iq860]

Did Voodoo PS/2 not work?

So, all your drives show up, only not as internal? If so try:

IOAHCI Block Injector kext.>>>Makes drives appear as internal. Installed in /Extra/Extensions. Install with System Utilities tasks.

If the KB and audio work with iBoot then the required parts should be in MultiBeast.

Can you tell us what is in your Extra>>Extensions folder?

finally the keyboard worked but i had to boot with iBoot and install from there
but now when i open my normal boot i cant see any partitions or drivers on the desktop

i have "FakeSMC.kext" and "IOAHCIBlockStorageInjector.kext" in my Extensions folder

 

[iq860]

here is my DSDT file im using now in extra folder so i need to know if my sound will work with it

again i have :

GA EP43-UD3L F9 Rev 1.0 (ALC888)
Intel Q8300 2.5/4
4 GB RAM Kingston 2x2
ATI HD 5770 1GB PowerColor
WiFi Card :TP-Link TL-WN651g "Atheros AR5005GS" Not working
OSX HDD ---> Hitachi HTS541612J9SA00 Media "120 GB"
windows ---> WDC WD1600AABS-61PRA0 Media "160 GB"

 

[iq860]

hase any one seen my DSDT ? any new ideas that might help ?

 

[SnapMan]

i have "FakeSMC.kext" and "IOAHCIBlockStorageInjector.kext" in my Extensions folder

You can run MultiBeast without a DSDT (even with one you need to manually install the audio kexts).

All variants of your board have a Realtek ALC888 codec so without DSDT the following kexts are suggested:

AppleHDARollback ALC8xxHDA and ALC888 (under non-DSDT HDA enabler)

Run system utilities when you install these.

Can you state exactly where and how the HD issue is occurring in more detail?