MultiBeast 3.2.0

[MacMan]

This topic is for bug reporting and feedback only.

Download MultiBeast Here

Please do not upload or redistribute MultiBeast to any other sites.

3.2.0 Released 2011-02-01

Visible Changes:

• 
  - Replaced Realtek Gigabit Ethernet with Lnx2Mac's RealtekRTL81xx Ethernet. NOTE: When chosen it will launch Lnx2Mac's Installer at the end of the MultiBeast install.
  - Removed AppleRTL8169Ethernet
  - Removed RealtekR1000SL
  - Replaced Intel 82566 Family Gigabit Ethernet with hnak's AppleIntelE1000e Ethernet. This is a port of the e1000.sourceforge.net Intel Wired Ethernet for Linux driver.
  - Added Chameleon 2.0 RC5 - Sandy Bridge. This is valv's branch r709 of Chameleon 2.0 RC5 that adds initial support for Sandy Bridge CPUs.
  - Removed ATY_Init Uakari
  - Removed ATY_Init Vervet
  - Changed description for NVEnabler to reflect that it's only used for older NVDIDIA graphics cards.

3.1.0 Released 2011-01-18

Visible Changes:

• 
  - Added ATI 48xx Patch for 10.6.6
  - Updated Chameleon 2.0 RC5 - Prerelease to RC5 r699
  - Updated Chameleon 2.0 RC5 - ATI Experimental to r700
  - Replaced fakesmc 2.5.0 with FakeSMC 3.1.0.
  - Added to Drivers & Bootloaders -> Kexts & Enablers -> Miscellaneous -> FakeSMC Plugins. It installs the following FakeSMC plugins in /Extra/Extensions: ACPIMonitor.kext, IntelThermal.kext and SuperIOFamily.kext. Additional plugins can be found at http://www.projectosx.com/forum/index.p ... topic=1643

Internal Changes:

• 
  - Updated ALC8xxHDA to version 1.0.1. This version restores Green Line Out and Headphone functionality to how Legacy8xx works.
  - Added bdmesg command line tool as part of all Chameleon installs.

3.0.3 Released 2010-12-30

Internal Changes:

• 
  - Fixed installaiion of IOUSBFamily Rollback
  - Added to installation of standalone themes deleting current Theme folder

3.0.2 Released 2010-12-29

Internal Changes:

• 
  - Fixed installation of tonymacx86 theme remixed by complx

3.0.1 Released 2010-12-29

Internal Changes:

• 
  - Fixed all of the incorrect smbios.plist choices

3.0.0 Released 2010-12-28

Visible Changes:

• 
  - Enabled all Choices by default. Remember to NOT check the top level choice and only the specific sub-choice options. Checking the root option will most likely corrupt your installation by installing unwanted or unneeded options.
  - Restructed menus: Advaned Options is now separated into Drivers & Bootloaders and Customization
  - Updated Chameleon 2.0 RC5 - Prerelease to RC5 r668
  - Updated Chameleon 2.0 RC5 - ATI Experimental to r679
  - Updated Chameleon post install script to correctly install on a dual boot system.
  - Added tonymacx86 theme remixed by complx to Themes
  - Changed EasyBeast and UserDSDT to install tonymacx86 theme remixed by complx
  - Removed all CPU specific smbios.plist definitions.
  - Removed Chameleon 2.0 RC4 by AsereBLN 1.1.9
  - Replaced all Legacy88xHDA kexts with the new unified ALC8xxHDA kext.
  - Replace LegacyAppleRTC with ElliottForceLegacyRTC
  - Updated EasyBeast and UserDSDT to use Chameleon 2.0 RC5 r668
  - Updated EasyBeast to use ElliottForceLegacyRTC instead of LegacyAppleRTC
  - Added iMac11,2 and iMac11,3 smbios.plist

 

[tonymacx86]

MultiBeast 3.2 Update
http://tonymacx86.blogspot.com/2011/02/ ... pdate.html

 

[ac197]

Thanks all of you

 

[JmChile]

what does this mean for users?

Added Chameleon 2.0 RC5 - Sandy Bridge. This is valv's branch r709 of Chameleon 2.0 RC5 that adds initial support for Sandy Bridge CPUs.

 

[AllanMarcus]

- Removed ATY_Init Uakari

ummm, not good for those of us with large monitors and 5780 cards. many of us cannot get the full resolution of our monitor with the experimental chameleon.

 

[zionic]

Finally, lnx2mac receives all his due glory!

 

[DoctorWho]

- Removed ATY_Init Uakari

ummm, not good for those of us with large monitors and 5780 cards. many of us cannot get the full resolution of our monitor with the experimental chameleon.

I am running a 5870 @ 1080P without any issues.

Also does this mean that Lnx2Mac's RealtekRTL81xx Ethernet is now out of beta?

 

[BerndVP]

ATY_Init Uakari removed ?

For those who doesn't need a 64bit kernel and are happy with an 32bit kernel,
I still would recommend to use 'ATY_Init Uakari" for the 'Sapphire HD5870'.
The 'CineBench 11.5 OpenGL' marks are: +/- 33 FPS

When using the ATI Experimental Bootloader r700 with GraphicsEnabler=Yes
'CineBench 11.5 OpenGL' marks are +/- 27 FPS. (32- and 64-bit)

For those who have an 'ATI HD5770', you can see in 'Notshy Guide'
that it got really good GPU Benchmarks ... around +/- 31 FPS instead of the HD5870 with this guide ...

 

[AllanMarcus]

- Removed ATY_Init Uakari

ummm, not good for those of us with large monitors and 5780 cards. many of us cannot get the full resolution of our monitor with the experimental chameleon.

I am running a 5870 @ 1080P without any issues.

1080p is a pretty small monitor by today's standards. I run a Dell 27" at 2560x1440. From what I can gather, many people with 27" or 30" monitors are having issues with r700.

 

[karacho]

1080p is a pretty small monitor by today's standards. I run a Dell 27" at 2560x1440. From what I can gather, many people with 27" or 30" monitors are having issues with r700.

Yeah, but an 27" or 30" monitor is very expensive by today's standards