- Joined
- Jan 23, 2017
- Messages
- 27
- Motherboard
- Gigabyte GA-B75M-D3H
- CPU
- i7-3770K
- Graphics
- GTX 960
- Mac
- Mobile Phone
Hello there Mojave user's,
I would like to request some assistance with the current hackintosh that I'm building:
My setup is this one:
MB: GA-B75M-D3H
CPU: i7-3770K
Ram: 16GB (4x4GB) DDR3 1600MHZ
Graphics: MSI - GeForce GTX 960 4GB
Storage: 128 SSD + 320GB HDD 3,5 7400RPM ( Converted to Fusion Drive )
I'm currently trying to run macOS Mojave and while following the setup guide on the website, I got stuck in the Multibeast Part. After selecting the following options ( I believe that they are the correct ones )
MultiBeast Configuration - 2018-12-29 06:10:09
Quick Start > Clover UEFI Boot Mode
Drivers > Audio > AppleALC
Drivers > Audio > Optional 3 Port (5.1) Audio Drivers > Disk > Intel Generic AHCI SATA Drivers > Misc > FakeSMC
Drivers > Misc > FakeSMC Plugins
Drivers > Misc > FakeSMC HWMonitor Application
Drivers > Network > Realtek > RealtekRTL8111 v2.2.2 Drivers > USB > 3rd Party USB 3.0
Drivers > USB > 7/8/9 Series USB Support
Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM Customize > System Definitions > iMac > iMac 13,2 Customize > Graphics > NVIDIA Web Drivers Boot Flag
I'm always getting the following error message:
"The installation failed
The Installer encountered an error that caused the software to fail.
Check the MultiBeast.log Install log for more Details"
Does any one had the same error, while installing Mojave?
I don't know if I'm using the right section to report this, however it would be really helpful if someone could give me some guidance!
Thanks a million!
King Regards,
Ribeirsg
I would like to request some assistance with the current hackintosh that I'm building:
My setup is this one:
MB: GA-B75M-D3H
CPU: i7-3770K
Ram: 16GB (4x4GB) DDR3 1600MHZ
Graphics: MSI - GeForce GTX 960 4GB
Storage: 128 SSD + 320GB HDD 3,5 7400RPM ( Converted to Fusion Drive )
I'm currently trying to run macOS Mojave and while following the setup guide on the website, I got stuck in the Multibeast Part. After selecting the following options ( I believe that they are the correct ones )
MultiBeast Configuration - 2018-12-29 06:10:09
Quick Start > Clover UEFI Boot Mode
Drivers > Audio > AppleALC
Drivers > Audio > Optional 3 Port (5.1) Audio Drivers > Disk > Intel Generic AHCI SATA Drivers > Misc > FakeSMC
Drivers > Misc > FakeSMC Plugins
Drivers > Misc > FakeSMC HWMonitor Application
Drivers > Network > Realtek > RealtekRTL8111 v2.2.2 Drivers > USB > 3rd Party USB 3.0
Drivers > USB > 7/8/9 Series USB Support
Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM Customize > System Definitions > iMac > iMac 13,2 Customize > Graphics > NVIDIA Web Drivers Boot Flag
I'm always getting the following error message:
"The installation failed
The Installer encountered an error that caused the software to fail.
Check the MultiBeast.log Install log for more Details"
Does any one had the same error, while installing Mojave?
I don't know if I'm using the right section to report this, however it would be really helpful if someone could give me some guidance!
Thanks a million!
King Regards,
Ribeirsg