MSI GL72 7QF-1024XFR compatible ?

[sinenox61]

Hello, I just bought a laptop one MSI GL72 7QF-1024XFR
And I would like to know if it is well compatible with OSX Sierra here config

CPU: Intel Core i5 (7th generation) 7300HQ - 2.5 GHz
17.3 "- 1920 x 1080 (Full HD)
RAM: 8 GB
1 TB HDD SATA - 5400 rpm
GPU: NVIDIA GeForce GTX 960M - 2 GB GDDR5 SDRAM

If someone has already done a hackingtosh with this pc or a similar config thank you to repeat it is back

 

[Feartech]

Hello, I just bought a laptop one MSI GL72 7QF-1024XFR
And I would like to know if it is well compatible with OSX Sierra here config

CPU: Intel Core i5 (7th generation) 7300HQ - 2.5 GHz
17.3 "- 1920 x 1080 (Full HD)
RAM: 8 GB
1 TB HDD SATA - 5400 rpm
GPU: NVIDIA GeForce GTX 960M - 2 GB GDDR5 SDRAM

If someone has already done a hackingtosh with this pc or a similar config thank you to repeat it is back

moved to laptop compatibility

check the faq:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

your video card may be optimus, therefore only the intel graphics will work unless you can disable intel from bios, then you can use nvidia

or you may just have nvidia, then the nvidia web drivers should be fine

your wifi card may need to be replaced if possible with compatible hardware

also a guide to install on laptops:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

also check the laptop guides section as someone may have a guide already

 

[sinenox61]

What boot option I advise you to be able to launch the installation because I fall directly on the ban

 

[RehabMan]

What boot option I advise you to be able to launch the installation because I fall directly on the ban

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"