Monterey on Gigabyte Z490I AORUS ULTRA (rev. 1.x)

[plok74122]

@Howking
I have a question
Gigabyte z490i ITX / 10900K / Opencore 0.5.9 / Catalina 15.5.5 / Ncase M1
I try to fix the usb ports
but I still can fix USB port on motherboard , like SS01, HS02 , HS09/10
the main problem is I have a AIO cooler , iCUE H100i RGB PRO XT
I think I can control it by liquidctl.
I use Hackintool, I can't se HS02 internal USB port

do you have any idea?

 

[plok74122]

I mapping usb port again, and I can control AIO cooler by liquidctl now

 

[xy74839]

是的，没问题的是12.2

Hi, Excuse me, my i225 network card is under Monterey 12.2, it has been unable to work, showing "cable unplugged", how did you deal with it, can you share your EFI?

 

[Howking]

can you share your EFI?

My efi is in the first post of this thread.

 

[xy74839]

My efi is in the first post of this thread.

I've used your efi file but still can't get it to work. Do you have any good suggestions please?

 

[Howking]

Do you have any good suggestions please?

Do you have an up-to-date BIOS?
(When I have time, I will take screenshots of my BIOS setup.)

 

[Howking]

Warning!!!
Do not update to 12.3 !
Network card stops working, bluetooth stops working, disk starts freezing.

 

[Hamedtaa]

Warning!!!
Do not update to 12.3 !
Network card stops working, bluetooth stops working, disk starts freezing.

Yes, I have almost the same config except for the CPU which mine is 11700K, after updating to 12.3, my Bluetooth stops working, and the disk freezes. any solution?

 

[Howking]

Yes, I have almost the same config except for the CPU which mine is 11700K, after updating to 12.3, my Bluetooth stops working, and the disk freezes. any solution?

I'm looking for a solution. So far I've reverted to 12.2.1

 

[Howking]

I discovered the cause of all the trouble. It's the I225-LM network card. In 10.3 it changes the driver to another one and it locks it and with it the whole computer. I tried changing the Device properites PciRoot(0x0)/Pci(0x1C,0xX)/Pci(0x0,0x0) - X=0..7 and the behavior changed but did not resolve. Now I don't have time to deal with it so I went back to 12.2.1 again, but maybe this will give someone a clue in the solution. (In my opinion, loading the apple driver should be disabled and replaced with another kext)