- Joined
- Apr 6, 2017
- Messages
- 41
- Motherboard
- Z170a > Need make and full model names > See Forum Rules!
- CPU
- i7-6700K
- Graphics
- HD 530
I'm trying to update from el capitan to high Sierra. I have made a USb installer and when I boot the installtion i get no signal on my monitor after 3/4 of loading the installation, pic 2 is the last i see Before the monitor goes off but the computure still running.
I had a problem it keept resting after 1/2 (pic1) way into the clover boot installation but i managed to solve that by change by changing my bios to:
I had a problem it keept resting after 1/2 (pic1) way into the clover boot installation but i managed to solve that by change by changing my bios to:
- Advanced \ System Agent(SA) Configuration → Primary Display : IGFX
- Advanced \ System Agent(SA) Configuration → DVMT Pre-Allocated : 96M
After that I got no signal on monitor. What i did then I saw a thread on rededit to solve it: change your Intel iGPU inject's hardware ID from 0x00000000 to 0x12345678 from Clover's settings. This is a change needed to boot from 10.12.4 onwards.
Attachments
Last edited: