Mavericks will not boot after 24 hours without power.

[bokkoo]

Hei.

I have updated to mavericks.
I used Multi Beast - Mavericks 6.0.0 and install everything I needed. (Quick start, sound and 3rd party Sata, No DSDT)
After reboot the computer work fine, sound, network, graphics, everything worked fine.
I was able to restart the computer as usual repeatedly.

The problem started after the computer was without power for 24 hours.
When I start the computer now I get stuck on a white page, all I see is a ring that spins.

Even if I use the -x,-v, I get stuck in the same place all the time.
It does not matter if I use -NPCI=0x2000 or GraphicsEnabler=Yes / No.

I have tried to reinstall 2 times (had to use -NPCI=0x2000) and made ​​some changes to the options in Multi Beast, (have tried to install without Lan, because the internet seems to work from the beginning which is odd).

Do I need to delete the old kext after fresh install?

AMD Radeon HD6670
Gigabyte GA-Z68X-UD3H-B3
i5

Thanks for the help

 

[bokkoo]

okay. so apparently I'm the first one who experienced this.

can anyone give me a suggestion for what I should do?

 

[alpha90]

It's not your system board button battery is it? If that battery is weak or dead, CMOS settings will go wacky or back to default.

When you say "without power," do you mean simply shutdown, or are you indicating "disconnected completely from AC wall power" such as by a power strip shut off? Even when shutdown, but still connected to wall socket, there is a trickle of juice to the mobo that compensates for a failing CMOS battery.

It's probably something else, but just saying.

 

[bokkoo]

Hello and thanks for reply.

The cord was unplugged from the wall.
I know that the computer is receiving power even when turned off. I have checked the BIOS settings and they look right.