Mavericks & GA-H67N-USB3-B3

[maddog]

Hi I need some help in selecting the correct settings in Multibeast 6 to get my system running ok.

Have tried installing Mavericks and seem to have problems with the integrated graphics HD3000 ( only getting 1024x768 )

Would like to run on multiple display ( no HDMI audio, just green jack )

Dell U2312HM & Samsung Syncmaster 2232BW

GA-H67N-USB3-B3
Intel Core i5-2500K
HD3000
8GB DDR3 1333

Any help would be much appreciated

If you have the same setup and have installed Mavericks fine also let me know thanks!

Thanks in advance

 

[maddog]

Have got it working. Had to select GraphicsEnabler=Yes and IGPlatformEnabler=No ( from Multibeast 6 ) and HD3000 working on both monitors.

 

[Biffbojangles]

Can you share your settings? I have the exact same build still running Snow Leopard. I have been hesitant to upgrade because I wanted to make sure all would work. What DSDT did you use? Could you also share what settings you used for MultiBeast? Anything you could provide would drastically help.

Thanks!

 

[jhunter]

I have pretty much the same setup as you (without the extra graphics card). I just upgraded to Mavericks and every time I run Multibeast 6 to enable 889 audio it hangs on boot (white screen). Verbose doesn't help me pinpoint issue.
What options are you using in Multibeast? I'm using the latest DSDT file.

Thanks

 

[maddog]

I use the " DSDT-GA-H67N-USB3-B3-F9.aml " but you need to check what firmware your Bios is. Mine is flashed to F9.

Drivers

Audio = Realtek 889 audio with DSDT.
Disk = 3rd Party SATA & 10.9.0 Trim Patch ( Trim is for my Samsung Pro 840 SSD )
Misc = Just FakeSMC plugins & Hardware Monitor ( Get error on the USB3 )
Ethernet = AppleRTL8169 2.0.6 ( Getting problems though with ethernet not working after sleep on Mavericks)

Bootloader = Chimera v2.2.1

Customise

Boot options

Generate CPU States
GraphicsEnabler=Yes
IGPEnabler=No
Use KernelCache

SSDT Options

Sandy Bridge Core i5

System Definitions

Mac Pro 3,1

Theme ( your own choice )


Hope this helps

 

[cheperun]

Hi maddog,

Ihave the same configuration but my cpu is I7. I try the same macboot configuration but if i use System Definition macbook pro 3,1 mac crash. My bios is F5. Do you know why?

Thank you

 

[DaleWilliams]

If you're 'upgrading to Maverick' on an existing Hackintosh running ML, Lion, etc.,
and did not do a 'clean install',
this thread explains how to get rid of old kexts that can cause problems with Multibeast:

http://www.tonymacx86.com/general-help/65279-updating-fakesmc-guide.html

 

[ryouitou]

any one helps with the same mobo but using i3-3220?
i'm currently stuck on the boot screen, never get into the install screen.

my spec:
GA-H67N-USB3-B3 (F9 BIOS)
intel i3-3220 (build-in HD2500 but not using)
Galaxy GeForce210 1GD3

running latest Mountain Lion well, but no luck with Mavericks.

any help will be thankful

 

[Adrian B]

any one helps with the same mobo but using i3-3220?
i'm currently stuck on the boot screen, never get into the install screen.

my spec:
GA-H67N-USB3-B3 (F9 BIOS)
intel i3-3220 (build-in HD2500 but not using)
Galaxy GeForce210 1GD3

running latest Mountain Lion well, but no luck with Mavericks.

any help will be thankful

Boot using -x, MultiBeast for Mavericks has MacMans Chimera which now uses additional graphics options:
http://www.tonymacx86.com/378-new-intel-hd-graphics-boot-flags-chimera.html

Your GeForce 210 probably needs Graphics Enabler=No, swell as Internal graphics being switched off to boot correctly. Suggest that you use search to see what other GT210 users are using for similar builds.


Adrian B

 

[ryouitou]

GREAT!!
I finally got in.
installing now, and will update the progress soon.

If all things are running good as well, will be starting to get the HD2500 working!
Thanks all the people on tonymacx86.com


By the way, bad iPhone 4 pic!