Machine reboots on shut down with usb 3 hub plugged in

[brado32]

Hi folks.. Weird issue with a newly built hack. Any time I have a usb 3 powered hub plugged into any usb 3 port upon shutting down the machine, it shuts off then immediately turns back on. If I unplug the hub, it shuts down properly. I have tried 3 different usb hubs. Obviously power down the usb line seems to be causing this. Did I miss a bios setting or something else I can try to stop this from happening?

BTW: this is occurring on the i6700 machine listed in my sig

thanks

 

[BreBo]

Enable Clover ACPI Fixes "FixShutdown" and "Halt Enabler".

Other users also reported success with:

• In Gigabyte Bios enable "ErP" fixes the problem
• After Disabling "Platform Power Management" within Bios shutdown works again

 

[brado32]

Hi folks.. Weird issue with a newly built hack. Any time I have a usb 3 powered hub plugged into any usb 3 port upon shutting down the machine, it shuts off then immediately turns back on. If I unplug the hub, it shuts down properly. I have tried 3 different usb hubs. Obviously power down the usb line seems to be causing this. Did I miss a bios setting or something else I can try to stop this from happening?

BTW: this is occurring on the i6700 machine listed in my sig

thanks

Sorry folks.. Should have searched before I posted this. I just found several threads on the issue. I will pursue those other possible fixes.

thanks

 

[favoriti]

Sorry folks.. Should have searched before I posted this. I just found several threads on the issue. I will pursue those other possible fixes.

thanks

Hi,

ERP enabled/Platform Power management disabled /Clover fixshutdown / Halt enabler give no succes
Did you find a fix for your Gigabyte GA-Z270X-Ultra Gaming ?
Got the same problem with usb external drives + bluetooth USB dongle are both connected

Many thanks