- Joined
- Jun 24, 2011
- Messages
- 23
- Motherboard
- none
- CPU
- none
- Graphics
- none
- Mac
- Classic Mac
- Mobile Phone
Hello all
I just upgrade to a Core i7 hackintosh and wanted a case there ware more fitting the my old Powerhack G5 case
This will be a worklog so stay tuned for more pictures as i get the parts home.
Hardware:
Parts:
Sry for bad quality the next picture will be better
Update: 15/09/2011
After some trouble with shipping and box size, my Motherboard tray is finally on it's way
Update: 19/09/2011
Just ordere some sweet cables
Update: 22/09/2011
Received my motherboard tray today, so startede to disassemble the mac pro case.
Got the middel plate of, was a son of bitch to get off.
Need to cut a hole here for PSU, Front panel cables
Removed the PCI card frame
Cut down the Sata cable, because i'm going to use a full ATX motherboard the last two sata slots a blocked :/
Update: 09/01/2012
Finally found time to cut out the back, I really like how it turned out.
All most done with the back.
Here it is i'm really happy with it
Now it's time to get the motherboard mounted.
And the PSU is now installed
Update: 10/01/2012
Allmost done.
The H100 is a bitch to get in and out put there is room
Only need to make and connect front audio and USB then i'm done
I just upgrade to a Core i7 hackintosh and wanted a case there ware more fitting the my old Powerhack G5 case
This will be a worklog so stay tuned for more pictures as i get the parts home.
Hardware:
- MB: GA-X58A-UD3R (Rev2/FF)[/*:m:2azyc959]
- CPU: Core i7-930 / Corsair H100[/*:m:2azyc959]
- Ram: 12Gb (3x4Gb 1600Mhz)[/*:m:2azyc959]
- GFX: 2 x AMD 6870 1GB CrossFire[/*:m:2azyc959]
- Wifi: AR5BXB72 with Adapter[/*:m:2azyc959]
- IR: Infrared Sensor part nr. 922-7195[/*:m:2azyc959]
- HD: 500Gb(OSX), 60GB SSD (Windows)[/*:m:2azyc959]
- PSU: Chill Innovation CP-1000M[/*:m:2azyc959]
Parts:
- Case: Mac Pro pre 2009[/*:m:2azyc959]
- Motherboard tray[/*:m:2azyc959]
Sry for bad quality the next picture will be better
Update: 15/09/2011
After some trouble with shipping and box size, my Motherboard tray is finally on it's way
Update: 19/09/2011
Just ordere some sweet cables
Update: 22/09/2011
Received my motherboard tray today, so startede to disassemble the mac pro case.
Got the middel plate of, was a son of bitch to get off.
Need to cut a hole here for PSU, Front panel cables
Removed the PCI card frame
Cut down the Sata cable, because i'm going to use a full ATX motherboard the last two sata slots a blocked :/
Update: 09/01/2012
Finally found time to cut out the back, I really like how it turned out.
All most done with the back.
Here it is i'm really happy with it
Now it's time to get the motherboard mounted.
And the PSU is now installed
Update: 10/01/2012
Allmost done.
The H100 is a bitch to get in and out put there is room
Only need to make and connect front audio and USB then i'm done