Mac OS Lion 10.7.x wit Intel "Celeron E3400" ?

[Pinarek]

I hope this is the right forum for this question

I would like to know if I have an Intel "Pentium E3400" it is a dual-core
can use with 2600 MHz with Mac OS 10.7.x Lion.

Or else, running Mac OS 10.7.x lion with a Celeron E3400?

What do I need for Intel processors up and running Mac OS 10.7.x to the Lion?

Thank you for this information.

Translatet with Google Translator from German to English

 

[macpeter2]

look at my build description in the user builds ...

 

[Pinarek]

Hello macpeter 2 thank you for you message

So you run the Intel E3400 on. I've tried it, after SnowLeo could be installed 10.6.8 without a problem and work well, which had been after I restored the 10.7.0 Lion "Mac base system" on a free Patrtition, when booting, it was already no more, to install them on the actual partition.

I have the board, an MSI P45 Neo3-V1.1, with nVidia GT9500 PCIe (1GB RAM)
and get 4 GB and 500 GB Sata Seagate DDR2RAM plate, given.
I thought that even the Intel Celeron E3400 that because it's a dual core and NO Cor2Duo, causes problems with 10.7.x Lion.

But with you it is running so well. Be because the two cores of the Celeron E3400 uses or is it only 1 core?

Well, I have run on for the past 4 years 2 Hackintosh PC. I with my babe 2 Hack's signature see 10.7.3 Lion good at running without problems.

Or I will for this board MSI P45 Neo3-Core2Duo on eBay as a used Buy an Intel C2D E8400 at 3 GHz, there are no problems with Lion Mountain Lion 10.7 and 10.8 will also run on it.

Excuse my english I'm living in Germany.

 

[macpeter2]

The Celeron E3400 has two cores and two threads in OS X.
Works great with OS X 10.7 Lion.

Have you prepared a USB with UniBeast and OS X 10.7.x?
That's the easiest way of installing OS X on a Hackintosh.