Contribute
Register

Losing Serial-ATA after about an hour of use.

Status
Not open for further replies.
MrInfamous

MrInfamous

Joined
Aug 5, 2011
Messages
5
Motherboard
GA-Z77-DS3H
CPU
Intel i7 2700K
Graphics
MSI Geforce GTS250 Frozr II
Mac
  1. iMac
  2. MacBook Air
  3. Mac Pro
Classic Mac
  1. 0
Mobile Phone
  1. Android
  2. iOS
Gigabyte GA-X58-USB3, Chimera, latest version, User DSDT...after about an hour of use, i check the about this mac & get "There was an error while scanning for Serial-ATA devices", & Disc Burning says "No Disc burning device was found. If the device was external, make sure it's connected & turned on." I have no idea why it's dying on me. I have successfully updated to 10.6.6 now, and don't want to go further until this problem is resolved. Any ideas? perhaps a kext i can use for this board? Thanks!
 

Attachments

  • Screen shot 2011-08-09 at 3.59.07 PM.png
    Screen shot 2011-08-09 at 3.59.07 PM.png
    353.7 KB · Views: 68
  • Screen shot 2011-08-09 at 3.58.59 PM.png
    Screen shot 2011-08-09 at 3.58.59 PM.png
    341.5 KB · Views: 63
  • Screen shot 2011-08-09 at 4.17.53 PM.png
    Screen shot 2011-08-09 at 4.17.53 PM.png
    459.7 KB · Views: 67
Seems funny..decided to install Lion after Snow Leopard troubles, and using X-Move with the same DSDT file, GA-X58-USB3 rev.F4..this installation is bullet proof...2 hours of updates, several restarts and no problems or complaints. X-Move was so easy!
 

Attachments

  • Screen Shot 2011-08-09 at 5.52.37 PM.png
    Screen Shot 2011-08-09 at 5.52.37 PM.png
    1.7 MB · Views: 67
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top