- Joined
- Apr 4, 2013
- Messages
- 166
- Motherboard
- << need manufacturer and model # >> See Forum Rules !!
- CPU
- i5 4670K
- Graphics
- hd 4600 + GT610
- Mac
up until a few weeks ago I've been running with 2 x GT610 over 3 monitors ..
(2xVGA and 1xDVI)
but since getting my AirPort/Bluetooth PCIe to enable handoff etc ..
I've enabled the HD4600 and connected the 3rd monitor to it.
With the 2xGT610 .. I got a SMOOTH and a FAST boot time
(even if the HD4600 is Enabled but not booting from it nor any screens connected to it.)
[video=youtube;BBZLTGMGhiI]https://www.youtube.com/watch?v=BBZLTGMGhiI[/video]
BUT ... when using the HD4600 .. some of the boot proccess will get mushy on screen
but will eventually finish loading ..
[video=youtube;jrpDsiAyFZc]https://www.youtube.com/watch?v=jrpDsiAyFZc[/video]
AND .. if I boot from the GT610 when the HD 4600 us enabled BUT connected.
NO GO ...
[video=youtube;2yoFOQJ_zDw]https://www.youtube.com/watch?v=2yoFOQJ_zDw[/video]
Can anybody help me figure out how to get a smooth boot with both enabled and connected ??
And .. of course .. as fast as can be ..
I've tried 2 types of IDs 0D220033 and 0C260000 (Using the latest Clover running 10.10.1)
Monitors are connected like so :
To the GT610 VGA to Monitor 3, DVI2VGA to Monitor 1 and HD4600 DVI to Monitor2.
Thank you in advance for your time and effort friends !
(2xVGA and 1xDVI)
but since getting my AirPort/Bluetooth PCIe to enable handoff etc ..
I've enabled the HD4600 and connected the 3rd monitor to it.
With the 2xGT610 .. I got a SMOOTH and a FAST boot time
(even if the HD4600 is Enabled but not booting from it nor any screens connected to it.)
[video=youtube;BBZLTGMGhiI]https://www.youtube.com/watch?v=BBZLTGMGhiI[/video]
BUT ... when using the HD4600 .. some of the boot proccess will get mushy on screen
but will eventually finish loading ..
[video=youtube;jrpDsiAyFZc]https://www.youtube.com/watch?v=jrpDsiAyFZc[/video]
AND .. if I boot from the GT610 when the HD 4600 us enabled BUT connected.
NO GO ...
[video=youtube;2yoFOQJ_zDw]https://www.youtube.com/watch?v=2yoFOQJ_zDw[/video]
Can anybody help me figure out how to get a smooth boot with both enabled and connected ??
And .. of course .. as fast as can be ..
I've tried 2 types of IDs 0D220033 and 0C260000 (Using the latest Clover running 10.10.1)
Monitors are connected like so :
To the GT610 VGA to Monitor 3, DVI2VGA to Monitor 1 and HD4600 DVI to Monitor2.
Thank you in advance for your time and effort friends !