- Joined
- Nov 1, 2017
- Messages
- 58
- Motherboard
- Dell Optiplex 3020
- CPU
- i5-4590
- Graphics
- HD 5450
- Mac
- Mobile Phone
Dear All,
After a successful Sierra build on my trusty old Optiplex 790 I decided to give this carbon beauty a try.
The main reason was that the DVMT value can be set to either 256 or 512 Mb, without BIOS hacking.
And that I have one for work that I actually cannot use for work - so I usually play around with it.
Specs:
Carbon X1 2016
i5 6200U
Intel HD520
8 Gb RAM
128 Gb M.2 SATA SSD
Intel I219-V LAN
Intel DualBand Wifi 8260
Synaptics Touchpad
Conexant SmartAudio
Intel USB 3.0 eXtensible host Controller
Reference guide:
https://github.com/pive/x1carbon2016-osx-elcapitan
Drivers used:
HFSPlus.efi
OsxAptioFixDrv-64.efi
Kexts used in Clover USB EFI:
FakeSMC
VoodooPS2Controller
config.plist:
RehabMan's config_HD520_530_540.plist (as is)
Everything needed was disabled in BIOS.
To actually boot the installer I needed to change the graphics id (to 0x12345678) in Clover options and disable the 32 Mb patch.
The Installer booted, erased the SSD and started installation. It took 1.5 hours, from a USB3 thumbdrive.... I knew something was wrong.
And yes, something was.
There are two issues I encountered:
1 - bless tool error - but then I did a 2nd round
2 - Installer was not able to install OS
With the 2nd error I was stilll able to start the OS load from Clover but the OS does not load, hangs at the very end.
Gave it 8 hours to complete, but of course it did not. To boot the OS I needed to change the graphics id (to 0x12345678) in Clover options and disable the 32 Mb patch - otherwise I was greeted with a KP.
What am I missing?
Thank you!
After a successful Sierra build on my trusty old Optiplex 790 I decided to give this carbon beauty a try.
The main reason was that the DVMT value can be set to either 256 or 512 Mb, without BIOS hacking.
And that I have one for work that I actually cannot use for work - so I usually play around with it.
Specs:
Carbon X1 2016
i5 6200U
Intel HD520
8 Gb RAM
128 Gb M.2 SATA SSD
Intel I219-V LAN
Intel DualBand Wifi 8260
Synaptics Touchpad
Conexant SmartAudio
Intel USB 3.0 eXtensible host Controller
Reference guide:
https://github.com/pive/x1carbon2016-osx-elcapitan
Drivers used:
HFSPlus.efi
OsxAptioFixDrv-64.efi
Kexts used in Clover USB EFI:
FakeSMC
VoodooPS2Controller
config.plist:
RehabMan's config_HD520_530_540.plist (as is)
Everything needed was disabled in BIOS.
To actually boot the installer I needed to change the graphics id (to 0x12345678) in Clover options and disable the 32 Mb patch.
The Installer booted, erased the SSD and started installation. It took 1.5 hours, from a USB3 thumbdrive.... I knew something was wrong.
And yes, something was.
There are two issues I encountered:
1 - bless tool error - but then I did a 2nd round
2 - Installer was not able to install OS
With the 2nd error I was stilll able to start the OS load from Clover but the OS does not load, hangs at the very end.
Gave it 8 hours to complete, but of course it did not. To boot the OS I needed to change the graphics id (to 0x12345678) in Clover options and disable the 32 Mb patch - otherwise I was greeted with a KP.
What am I missing?
Thank you!