Lenovo L440 battery/ac adapter status problem

[gpspl]

Hi, I have a problem with my laptop.
Everything is working except battery status and ac adapter status.
Battery level works for most part but sometimes it shows that battery is 0% but laptop is still working,
Also the ac adapter status is not working at all, it shows that laptop is on battery even when its connected to psu.

 

[RehabMan]

Hi, I have a problem with my laptop.
Everything is working except battery status and ac adapter status.
Battery level works for most part but sometimes it shows that battery is 0% but laptop is still working,
Also the ac adapter status is not working at all, it shows that laptop is on battery even when its connected to psu.

https://www.tonymacx86.com/threads/guide-how-to-patch-dsdt-for-working-battery-status.232986/

 

[gpspl]

But battery status is working almost every time, and your kext is loaded

 

[RehabMan]

But battery status is working almost every time, and your kext is loaded

Your kextcache output shows obvious problems you need to fix.

And config.plist/SystemParameters/InjectKexts=Yes is wrong. Should be "Detect".

 

[gpspl]

When i switch to detect lilu is not loading

 

[RehabMan]

When i switch to detect lilu is not loading

It is because you forgot to install it to /L/E.

All kexts you need must be installed to the system volume.
Read post #2 of the Clover guide for details:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Correct kext installation procedures and locations are covered in the FAQ:
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/