Lenovo 720 I7 16gig 8th gen 13IKB.

[snuup408]

Hello to all. I have a new 8th gen intel. Lenovo 13" 81c3. It has I7 855OU chip, 13IKB mobo, 16g memory, UHD620 graphics, Realtek HD audio. I thought i followed the Sierra Guide right. Set bios to ACHI. Turned off fast boot. Turned off secure boot. It will boot to usb clover screen but when I select verbose mode and or safe mode. I immediately goes to kernal panic.
0sxAptioFixDrv: starting overrides for \. IAbootFiles\boot.efi
Using reloc block: yes, hibernate wake: no
OsxAptioFixDrv: AllocateRelocBlock(): can not allocate relocation block (0x1A4B0 pages below 0x100000000): Not Found
_
Sorry cant post the actual screen at this point. Thanks in advance

 

[RehabMan]

Hello to all. I have a new 8th gen intel. Lenovo 13" 81c3. It has I7 855OU chip, 13IKB mobo, 16g memory, UHD620 graphics, Realtek HD audio. I thought i followed the Sierra Guide right. Set bios to ACHI. Turned off fast boot. Turned off secure boot. It will boot to usb clover screen but when I select verbose mode and or safe mode. I immediately goes to kernal panic.
0sxAptioFixDrv: starting overrides for \. IAbootFiles\boot.efi
Using reloc block: yes, hibernate wake: no
OsxAptioFixDrv: AllocateRelocBlock(): can not allocate relocation block (0x1A4B0 pages below 0x100000000): Not Found
_
Sorry cant post the actual screen at this point. Thanks in advance

Follow the Clover guide linked from the FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

Although you should read the FAQ for an overview of issues, the Clover guide is linked from the first question: "Q. Where do I start?", just after the bold face "Clover Guide".
Here is a direct link, just to be clear:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Also, your profile must be filled out with complete details as requested in the FAQ, again under "Q. Where do I start?". All seven details requested are equally important.

And if you have an issue (after following the guide), or on any other problem, you must provide a detailed description of the problem including information that helps us understand what you're doing. Always attach "Problem Reporting" files as per FAQ.
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html
The required files and data are fully detailed in the last question in the FAQ:
"Q. What are typical "Problem Reporting" files?"

 

[snuup408]

For the life of me i cant get to the OSX installer. Can anyone lead me into the right direction? I cant get past this panic.
Sorry i cant figure out how to make pics right side up

 

[RehabMan]

For the life of me i cant get to the OSX installer. Can anyone lead me into the right direction? I cant get past this panic.View attachment 311339 View attachment 311340 View attachment 311341 View attachment 311342
Sorry i cant figure out how to make pics right side up

"Problem Reporting" files are incomplete (no EFI/Clover attached).
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[snuup408]

Ok hello all . Hopefully ive done this right with profile and logs. I can get to the usb clover screen but cant get to the osx install. i get this kernal panic. Any help is appreciated.

 

[RehabMan]

Ok hello all . Hopefully ive done this right with profile and logs.View attachment 311884 I can get to the usb clover screen but cant get to the osx install. i get this kernal panic. Any help is appreciated.

As per guide, try AptioMemoryFix.efi instead of OsxAptioFixDrv-64.efi.
Details here:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/